JAIIB - Principles & Practices of Banking-Module-A - Indian
Financial System
Unit – 1 : Indian Financial System
1. NBFC are allowed to raise money from the public and lend monies through various
instruments for ex leasing, hire purchase and bill discounting.
2. Primary dealers deal in government securities, primary as well as secondary markets.
3. FI are financial institutions which provide long term funds for industry and agriculture.
4. Co-operative banks are allowed to raise deposits and give advances from/to public.
5. Urban co-operative banks are controlled by State government and RBI.
6. Other co-operative banks are controlled by State Government and NABARD.
7. CRR is a percentage of demand and time liabilities of a bank which is deposits held by the
bank.
8. SLR is a percentage of demand and time liabilities of a bank which is held in prescribed
government securities by the bank.
9. Bonds and debentures are examples of corporate securities and can be used to raise debts.
10. Debts, equities and derivatives are examples of securities.
11. SEBI is the capital market regulator.
12. Merchant bankers aka Investment bankers are licensed by SEBI and they issue stocks, raise
fund and manage them.
13. FII are authorized by SEBI to invest in Indian equity and debt market through stock
exchanges.
14. Depositories held securities in demat form (not physical).
15. Mutual fund pools money from investors and invests in stocks, debt and other securities.
16. The three regulatory authorities are:
RBI - for banks,
SEBI - for capital markets and
IRDA - for insurance sectors
Unit – 2 : Banking Regulation
1. RBI was constituted under the RBI Act 1934.
2. RBI started functioning with effect from 1 Apr 1935.
3. RBI is a state owned institution under the RBI (Transfer of Public Ownership) Act 1948.
4. RBI has 4 Deputy Governors and 15 Directors nominated by Union government.
5. All coins and Re 1 note is issued by Government of India but put into circulation by RBI.
6. RBI manages the exchange rate between the Indian Rupee and foreign currencies by selling
and buying foreign exchange to/from Authorised Dealers (RBI’s specified branches and other
dealers).
7. Important macroeconomic policies:
Monetary and credit policies - issued by RBI annually
Fiscal policy - issued by Ministry of Finance
EXIM policy - Ministry of Commerce
8. Saving and current accounts are demand liabilities.
9. Reducing CRR reduces loanable funds with banks.
10. RBI can prescribe SLR from 0 to 40 percent of bank’s DTL.
11. Increasing SLR reduces loanable funds with banks.
12. Bank rate is the rate at which RBI is prepared to buy or rediscount bills of exchange or other
eligible commercial paper from banks.
13. No bank held shares in a company as pledge or mortgagee in excess of the limit of 30% of
the paid-up capital of that company or 30% of the bank’s Paid-up capital and reserves, whichever
is less.
14. Open market operations refer to sale or purchase of government securities by RBI in the open
market.
15. Selective credit control is another tool which RBI uses for monetary control. It prevents
holding of essential commodities and resultant rise in their prices. Presently buffer stocks of
sugar, unreleased stocks of sugar with sugar mills representing free sale sugar and levy sugar are
covered by SCC.
Unit -3 : Retail Banking, ADR, GDR and PNs
1. Retail banking refers to dealing of commercial banks with individual customers, both assets
and liabilities sides.
Products offered are: SB, RD, CA, TDR, STDR, No Frill A/C, Home loan, auto loan, personal
loan, education loan, crop loan, credit card, debit cards, lockers, bankassurance etc.
2. Wholesale banking aka corporate banking or commercial banking refers to doing banking
business with industrial and business entities – mostly corporate and trading houses, including
multinationals, domestic business houses and prime public sector companies.
Products offered are: LC, BG, Collection of bills and documents, forex desk, tax collection,
RTGS, term lending, etc.
3. International banking refers to dealing in cross border transaction.
4. Universal banking offers all types of financial products like mutual fund, capital market
related products including share broking, commodity broking, etc, sale of gold/bullion,
government/corporate bonds, merchant banking, general banking, insurance (both life and nonlife),
etc under one roof.
5. A depository receipt (DR) is a form of negotiable (transferable) financial instrument that is
traded on a local stock exchange of a country but represents a security, usually in the form of
equity that is issued by a foreign publicly listed company.
6. Participatory Notes are like contract notes. They are issued by FII to entities that want to
invest in the Indian stock market but do not want to register themselves with the SEBI.
7. FII are not allowed to issue Participatory notes to Indian national or overseas corporate bodies
(because majority are owned/controlled by NRIs).
Unit – 4 : Role of Money Markets, Fixed Income Markets, Forex markets and FEMA
1. Money markets play a key role in banks’ liquidity management and the transmission of
monetary policy.
2. In normal times, money markets are among the most liquid in the financial sector.
3. By providing the appropriate instruments and partners for liquidity trading, the money market
allows the refinancing of short and medium-term positions and facilitates the mitigation of your
business’ liquidity risk.
4. The banking system and the money market represent the exclusive setting monetary policy
operates in.
5. A developed, active and efficient interbank market enhances the efficiency of central bank’s
monetary policy, transmitting its impulses into the economy best.
6. Development of the money market smoothes the progress of financial intermediation and
boosts lending to economy, hence improving the country’s economic and social welfare.
7. Therefore, the development of the money market is in all stakeholders’ interests: the banking
system itself, the Central Bank and the economy on the whole.
8. "Money Market" refers to the market for short-term requirement and deployment of funds.
Money market instruments are those instruments, which have a maturity period of less than one
year.The most active part of the money market is the market for overnight call and term money
between banks and institutions and repo transactions. Call Money / Repo are very short-term
Money Market products. The below mentioned instruments are normally termed as money
market instruments:
1. Certificate of Deposit (CD)
2. Commercial Paper (C.P)
3. Inter Bank Participation Certificates
4. Inter Bank term Money
5. Treasury Bills
6. Bill Rediscounting
7. Call/ Notice/ Term Money
9. Government Securities are issued by the Government for raising a Public loan or as notified in
the official Gazette.
10. They Consist of Government Promissory Notes, Bearer Bonds, Stocks or Bond held in Bond
Ledger Account.
11. They may be in the form of Treasury Bills or Dated Government Securities.
12. Government Securities are mostly interest bearing dated securities issued by RBI on behalf
of the Government of India.
13. GOI uses these funds to meet its expenditure commitments. These securities are generally
fixed maturity and fixed coupon securities carrying semi-annual coupon. Since the date of
maturity is specified in the securities, these are known as dated Government Securities.
14. Features of Government Securities
1. Issued at face value.
2. No default risk as the securities carry sovereign guarantee.
3. Ample liquidity as the investor can sell the security in the secondary market.
4. Interest payment on a half yearly basis on face value.
5. No tax deducted at source.
6. Can be held in Demat form.
15. Corporate bonds are debt securities issued by private and public corporations.
16. Companies issue corporate bonds to raise money for a variety of purposes, such as building a
new plant, purchasing equipment, or growing the business. When one buys a corporate bond, one
lends money to the "issuer," the company that issued the bond.
17. In exchange, the company promises to return the money, also known as "principal," on a
specified maturity date. Until that date, the company usually pays you a stated rate of interest,
generally semiannually.
18. While a corporate bond gives an IOU from the company, it does not have an ownership
interest in the issuing company, unlike when one purchases the company's equity stock.
19. An interest rate swap (IRS) is a liquid financial derivative instrument in which two parties
agree to exchange interest rate cash flows, based on a specified notional amount from a fixed rate
to a floating rate (or vice versa) or from one floating rate to another.
20. An interest rate future is a financial derivative (a futures contract) with an interest-bearing
instrument as the underlying asset. It is a particular type of interest rate derivative.
21. LIBOR or ICE LIBOR (previously BBA LIBOR) is a benchmark rate that some of the
world’s leading banks charge each other for short-term loans.
22. It stands for Intercontinental Exchange London Interbank Offered Rate and serves as the first
step to calculating interest rates on various loans throughout the world.
23. LIBOR is administered by the ICE Benchmark Administration (IBA), and is based on five
currencies: U.S. dollar (USD), Euro (EUR), pound sterling (GBP), Japanese yen (JPY) and Swiss
franc (CHF).
24. It serves seven different maturities: overnight, one week, and 1, 2, 3, 6 and 12 months. There
are a total of 35 different LIBOR rates each business day. The most commonly quoted rate is the
three-month U.S. dollar rate.
25. The Mumbai Interbank Offered Rate (MIBOR) is calculated everyday by the National Stock
Exchange of India (NSEIL) as a weighted average of lending rates of a group of banks, on funds
lent to first-class borrowers.
26. It is the interest rate at which banks can borrow funds, in marketable size, from other banks
in the Indian interbank market.
27. The MIBOR was launched on June 15, 1998 by the Committee for the Development of the
Debt Market, as an overnight rate.
28. The NSEIL launched the 14-day MIBOR on November 10, 1998, and the one month and
three month MIBORs on December 1, 1998.
29. Since the launch, MIBOR rates have been used as benchmark rates for the majority of money
market deals made in India.
30. Foreign Exchange Management Act (FEMA), 1999 is applicable-
To the whole of India.
Any Branch, office and agency, which is situated outside India, but is owned or controlled by a
person resident in India.
Unit – 5 : Role of Capital Markets, Securities and SEBI
1. Capital market is a market for long term debt and equity shares (both are issued and traded).
2. Two types of capital market are: primary and secondary.
In the primary market, securities (shares, bonds, debentures) are offered to the public for
subscription, for raising capital or fund.
In the secondary market, securities are traded after being initially offered to the public in the
primary market and/or listed on the Stock Exchange. Secondary market comprises equity
markets and debt markets.
3. Corporatization is the process of converting the organizational structure of the Stock Exchange
from a non-corporate to a corporate structure.
4. Demutualization refers to the transition process of a Stock Exchange from a mutually owned
association to a shareholders-owned company.
5. FII can invest up to 49 % in Stock Exchange in India.
6. No single investor can hold shares in an Indian Stock Exchange beyond a limit of 5%.
7. A broker is registered with SEBI and is a member of a recognized Stock Exchange and is
permitted to do trading of different Stock Exchanges.
8. Government securities are coupon bearing instruments which are issued by RBI on behalf of
Government of India. Government securities have maturity dates ranging from less than 1 year to
a max of 30 year.
9. Debentures are bonds issued by a company. It has fixed rate of interest usually payable halfyearly,
on specific dates and the principal amount repayable on a particular date on redemption
of debenture. It is an unsecured debt.
10. A bond is a negotiable certificate usually unsecured. In coupon bonds, interest are paid biannually,
in zero-coupon bonds, interest is paid at the maturity.
11. Commercial papers are borrowing of a company from the market. These money market
instruments are issued for 90 days.
12. Treasury bills are securities issued by RBI on behalf of Government of India for 91 days.
13. IPO refers to issue of fresh securities by an unlisted company or an offer for sale of its
existing securities or both for the first time to the public.
14. FPO refers to issue of fresh securities by an already listed company or an offer for sale to the
public through an offer document.
15. Rights Issue is when a listed company issues fresh securities to its existing shareholders as on
a recorded date.
16. A private placement is an issue of shares or of convertible security by a company to a select
group of persons under section 81 of the Companies Act 1956.
17. Any company making a public issue or a listed company making a RI of a value of more than
Rs 50 lacs is required to file a draft offer document with SEBI for its observations. This
observation period is only 3 months.
18. DIP stands for Disclosure and Investor Protection guidelines.
19. Offer document means prospectus in case of public issue.
20. Offer document means an offer for sale and letter of offer in case of a RI.
21. Offer documents are filed with Registrar of Companies and Stock Exchanges.
22. A draft offer document means the offer document in a draft stage.
23. The draft offer documents are filed with SEBI.
24. The period of filing draft offer document is at least 21 days prior to that of offer document.
25. RHP (Red Herring Prospectus) is a prospectus which doesn’t have details of either price of
number of shares being offered or the amount of issue. But the number of shares and the upper
and lower price bands are disclosed.
26. In case of FPO, the RHP can be filed with Registrar of Companies without the price band.
The price band is notified one day prior to the opening of the issue by way of an advertisement.
27. In book-built issue, price cannot be determined until the bidding process is completed.
28. In a book-built issue allocation, RII: NII: QIP::35: 15: 50 (or may be 60:10:30). RII – Retail
Individual Investors. NII – Non-Institutional Investors. QIP – Qualified Institutional Placement.
29. Retail individual investor means an investor who applies or bids for securities of or for a
value not more than Rs 1,00,000.
30. A merchant banker possessing a valid SEBI registration in accordance with the SEBI
(Merchant Bankers) Regulations, 1992 is eligible to act as a BRLM (Book running Lead
Manager).
31. A QIB (Qualified Institutional Buyer) means those investors who have expertise and
financial muscle to evaluate and invest in capital market. Examples: mutual fund, scheduled
commercial banks, FII registered with SEBI, insurance companies registered with IRDA, PF
with a minimum corpus of Rs 25 crore etc.
32. Above mentioned entities are not required to be register with SEBI as QIB.
Unit – 6 : Mutual Fund and IRDA
1. Mutual fund is a mechanism for pooling resources from the public by issuing units to them
and investing the funds in securities.
2. Mutual fund set up in the form of a trust and is registered with SEBI.
3. Unit holders refer to investor in mutual fund.
4. NAV denotes performance of a particular scheme of a mutual fund.
5. NAV per unit is the market value of securities of a scheme, less the expenses incurred on the
scheme divided by the total number of units of the scheme on any particular date.
6. The scheme that is available for subscription and repurchase on a continuous basis is known as
open ended scheme/plan.
7. The scheme that is available for subscription only during a specified period at the time of
launch of the scheme is a close ended scheme. It has a maturity period 3-10 years.
8. Growth scheme aka equity oriented scheme invest in equities (higher risks).
9. Income scheme/debt oriented scheme invest in fixed income securities such as bonds,
government securities, corporate debentures and money market instruments.
10. Balanced plan invest both in equities and fixed income securities (debt instruments) in 40-
60%.
11. Money market or liquid fund invest in (safer short-term instruments) treasury bills,
certificates of deposit, commercial paper and interbank call money, government securities, etc.
12. Gilt fund invest in government securities.
13. Repurchase or redemption price is the price or NAV at which an open-ended scheme
purchases or redeems its units from the unit holders.
Unit – 7 : Factoring and Forfaiting
1. Factoring is a service that is connected with the financing and collection of account
receivables in domestic and international trade.
2. Forfaiting is a means of finance (credit) an exporter of goods avails from an intermediary
called the forfaiter against the export receivables but without the obligation to repay the credit. It
is used in international trade.
3. The items in the books of a bank which are not mentioned in the balance sheet, is known as
off-balance sheet items. These are not assets or liabilities but may get converted into
assets/liabilities upon happening of certain events. That’s why off balance sheet items are aka
contingent liabilities.
4. Bank Guarantee is a contract of Guarantee means a contract to perform the promise or
discharge the liability of a third person in case of his default.
5. There are 3 persons in case of a Bank Guarantee - the guarantor/surety, Principal debtor, and
the creditor/beneficiary.
6. Bank Guarantee is a contingent liability.
7. A Letter of Credit is an undertaking given by the buyer’s bank on behalf of the buyer to the
seller, stipulating that if specified documents are presented within a stipulated date, the bank
establishing the credit will pay the amount of the bill drawn in terms of such Letter of Credit.
8. There are 4 persons in case of a Letter of Credit – buyer, opening bank/branch, seller, and
negotiating bank/branch.
9. A forward exchange contract is a firm contract between the bank and its customers for the
purchase/sale of a specified quantity of a stated foreign currency at a predetermined rate. On the
due date when the contract is executed, the transaction will be at the contracted rate of exchange
instead of the rate then prevailing, thus it is method of protecting oneself against exchange rate
fluctuations.
10. FRA (Forward Rate Agreement) and IRS (Interest Rate Swap) are such instruments that can
provide effective hedge against interest rate risks.
11. An FRA is a financial contract between 2 parties to exchange interest payments for a notional
principal amount on the settlement date for a specified period from start date to maturity date.
12. An IRS is a financial contract between two parties exchanging or swapping a stream of
interest payments for a notional principal amount on multiple occasions during a specified
period. Such contracts involve exchange of fixed to floating or floating to floating rate of
interest.
Unit – 8 : Risk Management and Basel II & III
1. Credit risk is the possibility of losses associated with the reduction in the credit quality of
borrowers or counterparties.
Credit risk forms – direct lending, Bank Guarantee, Letter of Credit, treasury operations,
securities trading businesses, cross border exposure, etc.
2. Market risk arises from adverse changes in market variables.
Market risk forms – liquidity risk, interest rate risk, foreign exchange rate (forex) risk,
commodity price risk, equity price risk, etc.
3. Operational risk (aka legal risk, administrative risk, settlement or payment risk) arises from
human or technical errors.
4. Under the Basel I accord, only the credit risk element was considered and the minimum capital
requirement of capital funds was fixed at 8 % of the total risk weighted assets.
5. In India, banks are required to maintain a minimum capital to risk weighted asset ratio
(CRAR) of 9 %.
6. Basel II has 3 pillars –
1 – minimum capital requirements
2 – supervisory review process
3 – market discipline.
7. The capital base of the bank consists of the following 3 types of capital requirements: Tier 1,
Tier 2 and Tier 3.
8. The total of Tier 2 (supplementary) elements will be limited to a maximum of 100 % of the
total of Tier 1 capital.
9. Subordinated term debt will be limited to a maximum of 50 % of Tier 1 capital.
10. Tier 3 capital will be limited to 250 % of a bank’s Tier 1 capital that is required to support
market risk.
11. Shareholder’s equity and retained earning consists of Tier 1 capital while supplementary
refers to Tier 2 capital.
12. The sum of total of Tier 2 and Tier 3 capital should not exceed the total of Tier 1 capital.
Unit – 9 : Alliances / Mergers / Consolidation
1. Alliance is a mutually agree to commercial collaboration between two to more organizations
where they agree to co-operate in the operation of a business activity. They remain independent
entities however.
2. Merger/amalgamation means combination of two or more companies into a single company,
where one company survives with its name or a combined new name, and other loses its
existence.
3. Consolidation is the combination of two existing companies into a new company where old
companies lose their existence and a new one is created either with a different name or same
name.
4. Acquisition or takeover of a company refers to the acquiring of a controlling stake in the
ownership of a company by another entity. This is done by buying the share capital of another
company.
Unit – 10 : Credit Information Companies, Fair Practices Code for Debt Collection, BCSBI
1. CIBIL is a composite credit bureau which contains the credit history of both commercial and
consumer borrowers.
2. CIBIL provides credit history of borrowers to its members in the form of credit information
reports (CIRs) to assist them in their loan appraisal process.
3. In the matter of recovery of dues, banks / NBFCs may ensure that they, as also their agents,
adhere to the extant instructions on Fair Practice Code for lenders as also IBA’s Code for
Collection of dues and repossession of security. In case banks / NBFCs have their own code for
collection of dues it should, at the minimum, incorporate all the terms of IBA's Code.
4. In particular, in regard to appointment of third party agencies for debt collection, it is essential
that such agents refrain from action that could damage the integrity and reputation of the bank /
NBFC and that they observe strict customer confidentiality.
5. All letters issued by recovery agents must contain the name and address of a responsible
senior officer of the card issuing bank whom the customer can contact at his location.
6. Banks / NBFCs / their agents should not resort to intimidation or harassment of any kind,
either verbal or physical, against any person in their debt collection efforts, including acts
intended to humiliate publicly or intrude the privacy of the credit card holders’ family members,
referees and friends, making threatening and anonymous calls or making false and misleading
representations.
7. The Banking Codes and Standards Board of India (BCSBI) was set up on 18th February 2006
as a collaborative effort of RBI and Banks, on the lines of a similar set up in UK to oversee the
"Banking Code", a voluntary Code, evolved by the British Bankers Association (BBA), which is
adopted by all banks in UK.
8. The proposal for setting up the BCSBI was based on the recommendation made by the
Committee on Procedures and Performance Audit on Public Services (Tarapore Committee).
9. It provides valuable protection for customers on a day-to-day basis as also in the times of
financial difficulty.
10. The code applies to savings deposits and current accounts, card products and services, loans
and overdrafts and payment services including foreign exchange.
11. Member banks of BCSBI would put in place the following grievance redressal mechanism in
their banks:
Have a Help desk / Helpline at the branch
Have a Code Compliance Officer at each Controlling office above the level of the branch
Display at each branch name and contact number of Code Compliance Officer
Display Name and address of the Banking Ombudsman.
Unit – 11 : Recent Developments in the Indian Financial System
1. Indian Government appointed a committee under the chairmanship of Sukhamoy Chakravarty
in 1984 to review the Indian monetary system. Later, Narayanan Vaghul working group and
Narasimham Committee was also set up. As per the recommendations of these study groups and
with the financial sector reforms initiated in the early 1990s, the government has adopted
following major reforms in the Indian money market.
a. Deregulation of the Interest Rate
b. Money Market Mutual Fund (MMMFs)
c. Liquidity Adjustment Facility (LAF)
d. Electronic Transactions
e. Establishment of the CCIL
f. Development of New Market Instruments : The government has consistently tried to introduce
new short-term investment instruments. Examples: Treasury Bills of various duration,
Commercial papers, Certificates of Deposits, MMMFs, etc. have been introduced in the Indian
Money Market.
2. Commercial paper is an unsecured money market instrument issued in the form of a
promissory note. It enables highly rated corporate borrowers to diversify their sources of shortterm
borrowings and to provide an additional instrument to investors.
3. A certificate of deposit is a negotiable money market instrument which is issued in
dematerialised form or as a Usance Promissory Note, for funds deposited at a bank or other
eligible financial institution for a specified time period.
4. The minimum maturity period of CD is 8 days with effect from 29 Apr 2005.
5. The Reserve Bank has taken many initiatives towards introducing and upgrading safe and
efficient modes of payment systems in the country to meet the requirements of the public at
large.
6. Since paper based payments occupy an important place in the country, Reserve Bank had
introduced Magnetic Ink Character Recognition (MICR) technology for speeding up and
bringing in efficiency in processing of cheques.
7. Later, a separate High Value Clearing was introduced for clearing cheques of value Rupees
one lakh and above. This clearing was available at select large centres in the country (since
discontinued).
8. Recent developments in paper-based instruments include launch of Speed Clearing (for local
clearance of outstation cheques drawn on core-banking enabled branches of banks), introduction
of cheque truncation system (to restrict physical movement of cheques and enable use of images
for payment processing), framing CTS-2010 Standards (for enhancing the security features on
cheque forms) and the like.
Electronic Payments
9. The continued increase in the volume of cheques added pressure on the existing set-up, thus
necessitating following cost-effective alternative systems.
a. Electronic Clearing Service (ECS) Credit
b. Regional ECS (RECS)
c. Electronic Clearing Service (ECS) Debit
d. National Electronic Funds Transfer (NEFT) System
e. Real Time Gross Settlement (RTGS)System
f. Clearing Corporation of India Limited (CCIL)
Other Payment Systems
10. Pre-paid instruments are payment instruments that facilitate purchase of goods and services
against the value stored on these instruments. The value stored on such instruments represents
the value paid for by the holders by cash, by debit to a bank account, or by credit card. The prepaid
payment instruments can be issued in the form of smart cards, magnetic stripe cards,
internet accounts, internet wallets, mobile accounts, mobile wallets, paper vouchers, etc.
11. The use of pre-paid payment instruments for cross border transactions has not been
permitted, except for the payment instruments approved under Foreign Exchange Management
Act,1999 (FEMA).
12. Reserve Bank brought out a set of operating guidelines on mobile banking for banks in
October 2008, according to which only banks which are licensed and supervised in India and
have a physical presence in India are permitted to offer mobile banking after obtaining necessary
permission from Reserve Bank
ATMs / Point of Sale (POS) Terminals / Online Transactions
13. As on Feb, 2014, there are over 1,50,008 ATMs (76836 onsite and 73172 offsite) in India.
Savings Bank customers can withdraw cash from any bank terminal up to 5 times in a month
without being charged for the same (refer RBI circulars for latest changes).
14. Reserve Bank has mandated re-crediting of failed transactions within 7 working day and
mandated compensation for delays beyond the stipulated period.
15. As on Feb, 2014, there are over 10 lakh POS terminals in the country, which enable
customers to make payments for purchases of goods and services by means of credit/debit cards.
16. To facilitate customer convenience the Bank has also permitted cash withdrawal using debit
cards issued by the banks at PoS terminals.
17. Further, to reduce the risks arising out of the use of credit/debit cards over internet/IVR
(technically referred to as card not present (CNP) transactions), Reserve Bank mandated that all
CNP transactions should be additionally authenticated based on information not available on the
card and an online alert should be sent to the cardholders for such transactions.
National Payments Corporation of India
18. The Reserve Bank encouraged the setting up of National Payments Corporation of India
(NPCI) to act as an umbrella organisation for operating various Retail Payment Systems (RPS) in
India. NPCI became functional in early 2009. NPCI has taken over National Financial Switch
(NFS) from Institute for Development and Research in Banking Technology (IDRBT).
19. Oversight of the payment and settlement systems is a central bank function whereby the
objectives of safety and efficiency are promoted by monitoring existing and planned systems,
assessing them against these objectives and, where necessary, inducing change. By overseeing
payment and settlement systems, central banks help to maintain systemic stability and reduce
systemic risk, and to maintain public confidence in payment and settlement systems.
JAIIB - Principles & Practices of Banking-Module-B - Functions
of Banks
Unit – 12 : Banker-Customer Relationship
1. A firm consisting of not more than 10 partners or a company incorporated under Indian
Companies Act 1956 can be a bank.
2. The relationship between customer and bank, when the customer deposits money with the
bank, is a lender and a borrower and thus a creditor and a debtor.
3. The relationship between customer and bank, when the bank lends money to the customer, is a
borrower and lender and thus a debtor and a creditor.
4. The relationship between customer and bank, when a customer deposits certain valuables,
bonds, securities etc, with the bank for safe custody, is bailor-bailee and thus customer and
trustee.
5. The relationship between customer and bank, when a bank performs the services of
remittance, collection of cheques, bills, etc on behalf of the customers, is principal and agent.
6. The relationship between customer and bank, when a bank provides safe deposit lockers to the
customer, who hires them on a lease basis, is lessee-lessor.
7. The relationship between customer and bank, when one party promises to save the other from
loss caused to the other by the conduct of promisor, is indemnifier and indemnified (or indemnity
holder).
8. Merchant bankers are financial intermediaries because they transfer capital from investor or
bond subscriber (owner of capital) to government or corporate (user).
9. Lease financing means leasing out the capital purchase of assets to another company against
monthly rents for asset’s consumption or use.
Unit – 13 : Bankers Special Relationship
1. A mandate (an unstamped agreement) is an authority given by the account holder in favour of
a third person to do certain acts on his behalf.
2. Institutions cannot issue mandate, instead they issue a power of attorney.
3. Power of Attorney is a legal document (as it is a stamped document and is executed in the
presence of a notary public/magistrate of a court/authorized government official) executed by
one person called donor (principal) in favor of another person called donee agent to act on behalf
of the former, as per the authority given in the document.
4. Donee means the person who issues Power of Attorney and donor means the person to whom
Power of Attorney is given.
5. General/universal power of attorney is issued for acting in more than one transaction while
special/limited Power of Attorney is issued for only one transaction.
6. Garnishee order is an order of the court obtained by a judgement creditor attaching the funds
belonging to a judgement debtor (customer) in the hands of his debtors, including a bank, who is
called a garnishee, advising not to release the money until directed by the court to do so.
7. Cheques presented after service of the garnishee order should be returned with the “refer to
drawer” remark.
8. Preliminary proceedings of a court are called garnishee order nisi.
9. Subsequent proceedings of a court are called garnishee absolute.
10. When a bank has a prior right to set-off, the bank is not bound by the garnishee order.
11. When a lien is marked on fixed deposit receipts, it cannot be attached by a garnishee order.
12. Any excess over the lien is attachable by the garnishee order.
13. Orders received from the court for recovery of certain debts are called garnishee order.
14. Orders received from the revenue authorities (income tax/sale tax authority) are called
attachment order.
15. Credits received after garnishee orders are not attachable because debts due or accruing at the
time of receipt of order are only attachable.
16. In "Joint Accounts" with "Either or Survivor" clause, "Garnishee Order" if in a single name,
cannot be attached.
17. In "Joint Accounts" with "Former or Survivor" clause, "Garnishee Order" if in a single name,
can be attached.
18. The personal accounts of a partner can be attached with garnishee order for the firm’s debt.
19. The trust’s account cannot be attached garnishee order.
20. When a customer has more than 1 account and one is in credit and other is in debit, then the
garnishee order can be attached only if the net result is in credit.
21. A lien is a right of the banker to retain possession of the goods and securities owned by the
debtor until the debt due from the latter is paid.
22. The banker’s lien is an implied (understood) pledge (promise/guarantee).
23. In case of lien, the bank can sell the goods and securities in case the debt is not paid under
section 171 of the Indian Contract Act 1872.
24. Lien cannot apply in safe deposit locker.
25. Set-off means adjusting debit balance in one account with an account having credit balance
of the same customer.
26. A deceased credit account and a customer debit account cannot be combined.
Unit – 14 : Banking Ombudsman Scheme and Consumer Protection Act
1. The Banking Ombudsman Scheme is introduced under Section 35 A of the Banking
Regulation Act, 1949 by RBI with effect from 1995.
2. The Banking Ombudsman Scheme enables an expeditious and inexpensive forum to bank
customers for resolution of complaints relating to certain services rendered by banks.
3. The Banking Ombudsman is a senior official appointed by the Reserve Bank of India to
redress customer complaints against deficiency in certain banking services.
4. All Scheduled Commercial Banks, Regional Rural Banks and Scheduled Primary Cooperative
Banks are covered under the Scheme.
5. The Banking Ombudsman can receive and consider any complaint relating to the following
deficiency in banking services (including internet banking):
non-payment or inordinate delay in the payment or collection of cheques, drafts, bills
etc.;
non-acceptance, without sufficient cause, of small denomination notes tendered for any
purpose, and for charging of commission in respect thereof;
non-acceptance, without sufficient cause, of coins tendered and for charging of
commission in respect thereof;
non-payment or delay in payment of inward remittances ;
failure to issue or delay in issue of drafts, pay orders or bankers’ cheques;
non-adherence to prescribed working hours ;
failure to provide or delay in providing a banking facility (other than loans and advances)
promised in writing by a bank or its direct selling agents;
delays, non-credit of proceeds to parties accounts, non-payment of deposit or nonobservance
of the Reserve Bank directives, if any, applicable to rate of interest on
deposits in any savings,current or other account maintained with a bank ;
complaints from Non-Resident Indians having accounts in India in relation to their
remittances from abroad, deposits and other bank-related matters;
refusal to open deposit accounts without any valid reason for refusal;
levying of charges without adequate prior notice to the customer;
non-adherence by the bank or its subsidiaries to the instructions of Reserve Bank on
ATM/Debit card operations or credit card operations;
non-disbursement or delay in disbursement of pension (to the extent the grievance can be
attributed to the action on the part of the bank concerned, but not with regard to its
employees);
refusal to accept or delay in accepting payment towards taxes, as required by Reserve
Bank/Government;
refusal to issue or delay in issuing, or failure to service or delay in servicing or
redemption of Government securities;
forced closure of deposit accounts without due notice or without sufficient reason;
refusal to close or delay in closing the accounts;
non-adherence to the fair practices code as adopted by the bank or non-adherence to the
provisions of the Code of Bank s Commitments to Customers issued by Banking Codes
and Standards Board of India and as adopted by the bank ;
non-observance of Reserve Bank guidelines on engagement of recovery agents by banks;
and
any other matter relating to the violation of the directives issued by the Reserve Bank in
relation to banking or other services.
6. A customer can also lodge a complaint on the following grounds of deficiency in service with
respect to loans and advances non-observance of Reserve Bank Directives on interest rates;
delays in sanction, disbursement or non-observance of prescribed time schedule for
disposal of loan applications;
non-acceptance of application for loans without furnishing valid reasons to the applicant;
and
non-adherence to the provisions of the fair practices code for lenders as adopted by the
bank or Code of Bank’s Commitment to Customers, as the case may be;
non-observance of any other direction or instruction of the Reserve Bank as may be
specified by the Reserve Bank for this purpose from time to time.
The Banking Ombudsman may also deal with such other matter as may be specified by the
Reserve Bank from time to time.
7. One can file a complaint before the Banking Ombudsman if the reply is not received from the
bank within a period of one month after the bank concerned has received one s representation, or
the bank rejects the complaint, or if the complainant is not satisfied with the reply given by the
bank.
8. One can file a complaint with the Banking Ombudsman simply by writing on a plain paper.
One can also file it online (at “click here to go to Banking Ombudsman scheme” or by sending
an email to the Banking Ombudsman.
9. The Banking Ombudsman may reject a complaint at any stage if it appears to him that a
complaint made to him is:
not on the grounds of complaint referred to above
compensation sought from the Banking Ombudsman is beyond Rs 10 lakh .
requires consideration of elaborate documentary and oral evidence and the proceedings
before the Banking Ombudsman are not appropriate for adjudication of such complaint
without any sufficient cause
that it is not pursued by the complainant with reasonable diligence
in the opinion of the Banking Ombudsman there is no loss or damage or inconvenience
caused to the complainant.
10. If one is aggrieved by the decision, one may, within 30 days of the date of receipt of the
award, appeal against the award before the appellate authority. The appellate authority may, if
he/ she is satisfied that the applicant had sufficient cause for not making an application for appeal
within time, also allow a further period not exceeding 30 days.
11. Consumer Protection Act, 1986
a. It extends to the whole of India except the State of Jammu and Kashmir.
b. It shall come into force on such date as the Central Government may, by notification, appoint
and different dates may be appointed for different States and for different provisions of this Act.
c. Save as otherwise expressly provided by the Central Government by notification, this Act shall
apply to all goods and services.
12. "complaint" means any allegation in writing made by a complainant that—
a. an unfair trade practice or a restrictive trade practice has been adopted by any trader or service
provider.
b. the goods bought by him or agreed to be bought by him; suffer from one or more defects.
c. the services hired or availed of or agreed to be hired or availed of by him suffer from
deficiency in any respect.
d. a trader or service provider, as the case may be, has charged for the goods or for the service
mentioned in the complaint a price in excess of the official/valid price.
e. goods which will be hazardous to life and safety when used or being offered for sale to the
public.
f. services which are hazardous or likely to be hazardous to life and safety of the public when
used, are being offered by the service provider which such person could have known with due
diligence to be injurious to life and safety.
Unit – 15 : Payment and Collection of Cheques and Other NI
1. In Sans recourse endorsement, liability of the endorser is excluded.
2. In facultative endorsement, the notice of dishonour is waived.
3. The 3 negotiable instruments are promissory notes, bills of exchange and cheque.
4. A paying banker is protected under NI Act in the following cases:
a. Forged endorsement in an
i. order cheque under section 85 (1)
ii. bearer cheque under section 85 (2)
iii. draft under section 85 (A)
b. Material alteration in a cheque under section 89
c. Payment of a crossed cheque under section 128.
Unit – 16 : Opening Accounts of Various Types of Customers
1. Indian Majority Act 1875 defines the age of majority to be 18 years.
2. Section 26 of the NI Act provides that a minor may draw, endorse, deliver and negotiate a
negotiable instrument and as such, a minor can draw a cheque. The minor’s age should be above
13 years and should be literate. No overdraft is allowed in these accounts.
3. Two minors cannot open a joint account.
4. In an HUF, the members of a family are called coparceners and the eldest male child is called
Karta (Manager), the Karta operates the account.
5. All the adult members have to sign account opening form while opening HUF account.
6. Registration of a partnership is optional (except in states of Gujarat and Maharashtra where it
is compulsory).
7. When there is an addition into the partnership, the old account can be continued ifthe balance
is in credit, else old account should be closed and a new one should be opened. This process
avoids Clayton’s Rule.
8. Death of a partner dissolves the partnership firm.
9. A public limited company – minimum 7 members, maximum unlimited members. Minimum
paid up capital of Rs 5 Lakh.
10. A private limited company – minimum 2 members, maximum 50 members. For banking
business maximum number is 20. Minimum paid up capital of Rs 1 Lakh.
11. A government company – minimum 51% of the shares are held by the government.
12. Internal rules of a company are mentioned in articles.
Unit – 17 : Ancillary Sercices
Each bank has two main activities as the sourcing or borrowing of funds ( as deposits and capital
from the market) and the deploying or lending the funds as Loans and Investments): these form
the traditional and core activities of all the banks.
Apart from these basic activities, the banks provide a variety of other services or products.The
most popular ones are listed below.
1) Funds transfer service: Useful for sending and receiving money from all over the world.The
products that cover these services are Demand Drafts, Bankers Checks/Pay orders,
EFT(Electronic Funds Transfer ),etc.
2) Forex service: You can buy the foreign exchange for any purpose of expenditures like travel,
buying merchandise,etc..and sell the same to the bank when you earn or receive from abroad . Of
course, these forex transactions are subject to the rules and regulations prevailing in a country
and they are provided by only those bank branches which are approved by the Banking
Authority or Regulator for this purpose.
3) Custodial Service: You can keep your valuables like jewels, documents, etc.. under this
service which is commonly known as Locker facility(Safe Deposit Vaults in banking parlance.
The bank will collect a nominal fee for the service.
4) Gold sale: You can buy pure gold for self consumption or for trading by the jewelry
businesses. Here also, only a few selected branches of banks or banks are allowed to provide
this. The products usually range from a coin to a 100 gm biscuit or bar.
5) Investment service: Invest your money in the mutual funds run by the banks. The service
comes as Portfolio service( the decision to maximize the returns on your money is left with the
banker or portfolio manager) and as Stand-alone product where the decision to get maximum
returns is borne by you. Both have the plus and minus but these products are offered to suit the
convenience of the investors. Portfolio means a basket of investments and securities in a
combined form. Debt securities will yield interest income and equity investment will yield
dividend income. Portfolio management means management of a combination of securities to get
the most efficient portfolio.
6) Insurance sale: A range of insurance products covering the risk of life, health, assets like
vehicle, credit and debit cards, travel etc. are offered by almost all the banks by themselves or in
collaboration with the leading insurer companies ,which again may be local or multinational
entities.
7) Card services: Primarily intended for safety and convenience purpose but now, has become a
payment mode and a symbol of economic status. The card products usually are called as Debit
card, Credit card .
8) eBanking: also known as Netbanking or Internet banking is the latest and most convenient
facility of the banks .You can get id and password to operate your account online : for transfer of
funds to another account in the same bank or another bank. You can keep the surplus funds in
fixed deposit by using this facility. The best use of this facility is for shopping online.
Unit – 18 : Cash Management Services and its Importance
1. Cash management is a broad term that refers to the collection, concentration, and
disbursement of cash.
2. It encompasses a company’s level of liquidity, its management of cash balance, and its shortterm
investment strategies
3. The objective of a cash management system is to improve revenue, maximize profits,
minimize costs and establish efficient management systems to assist and accelerate growth.
4. In India, the cash management business primarily involves collections and payments services.
5. Products Offered by Banks Under Collections (Paper and Electronic)
a. Local cheque collections
b. High value (0 Day clearing)
c. Magnetic ink character recognition (MICR)
d. Outstation cheque collections
e. Cheques drawn on branch locations
f. Cheques drawn on correspondent bank locations
g. Cheques drawn on coordinator locations
i. House cheque collections
j. Outside network cheque collections
k. Cash collections
l. ECS-Debit
m. Post dated cheque collection
n. Invoice collections
o. Capital market collections
6. Products Offered by Banks Under Payments (Paper and Electronic)
a. Demand drafts/banker’s cheques
b. Customer cheques
c. Locally payable
d. Payable at par
e. RTGS/NEFT/ECS
f. Cash disbursement
g. Payments within bank
h. Capital market payments
7. In a dynamic economy, markets need to play a key role in guiding the development of
infrastructure, including mechanisms like payments systems.
8. This means that innovation and competition will be central to the future development of the
payments system - as they are in other areas of the economy.
9. Efficient cash management is a must to support an institution’s growth, and therefore,
adopting the best cash management practices is necessary.
Unit – 19 : Principles of Lending, Working Capital Assessment and Credit Monitoring
1. Stocks procured through L/C are taken under hypothecation.
2. An increase in the ratio of current assets to total assets results in a decline in the profitability
of the firm (because investment in current assets is less profitable than those in fixed assets).
3. Term loans are loans which are repayable after one year and up to 10 years. Short term loan =
1-3 years, medium term loans = 3-7 years, long term loans = 7-10.
4. Difference between term loan and working capital is that term loans are repayable in quarterly
or half yearly installments whereas working capital is generally availed in cash credit
hypothecation accounts with frequent drawings and is payable on demand.
5. For an assessment of the working capital needs of a borrower who requires fund based limits
in excess of Rs 10 crore, the cash budget system (instead of cash flow statement) should be used.
6. Cash flow system deals with both cash and non-cash funds, while the cash budget system
deals with cash transactions only.
7. The ceiling for banks in providing advances/loans to borrowers is 15% of the capital funds in
case of a single borrower and 40% in case of group borrowers.
8. Working capital means the sum total of inventory, receivables and other current assets held by
a business entity.
9. Working capital is computed by the banks through the concept of operating cycle, i.e., the
time taken by a business entity to get the money released from the raw materials, semi-finished
goods, receivables, etc.
Unit – 20 : Priority Sector Advances
1. RBI has advised the banks to raise the shares of priority sector lending to 40 % of the
aggregate bank advances.
2. Out of this 40 %, 18 % is for agricultural sector (no targets for foreign banks), 10 % is for
weaker sections (no targets for foreign banks), and 1 % of previous year’s total advances are
given under DRI (Differential Rate of Interest Scheme) (no targets for foreign banks).
3. Above mentioned limit is for domestic commercial banks. For foreign banks, 32 % of ANBC
(Adjusted Net Bank Credit) is for priority sector advances.
4. Export credit is not a part of priority sector for domestic commercial banks. However foreign
banks are given target of 12 % of ANBC.
5. Description of Micro, Small and Medium Sectors:
Investment in plant and machinery Investment in Equipment Type of Enterprise
(Manufacturing Sector) - (Services Sector)
Up to 25 lacs - up to 10 lacs Tiny
25 lacs to 5 crore - 10 lacs to 2 crore Small
5 crore to 10 crore - 2 crore to 5 crore Medium
6. Micro credit includes provision of very small amounts up to Rs 50,000 per borrower.
7. The government has decided that the farmers should receive short term credit at 7 % with an
upper limit of 3 lakh on the principal amount. On this amount, the government provides interest
subvention of 2 % p.a. to the banks.
8. This 2 % subvention will be available to banks on condition that they make short term credit
available at the ground level with ROI of 7 % p.a.
Unit – 21 : Agricultural Finance
1. Loans repayable up to 18 months are short term loans.
2. Medium/long term loans are for more than 36 months.
3. All farmers who require loan for their cultivation expenses are eligible to get loan under KCC
scheme.
4. KCC is valid for a period of 3 years subject to an annual review. Any number of withdrawals
and repayments are permitted under this scheme.
Unit – 22 : Micro, Small and Medium Enterprises in India
1. A credit guarantee scheme was started to provide collateral-free loans to micro and small
entrepreneurs.
2. The exemption limit for relief from payment of Central Excise duty was raised to Rs 1 crore.
3. The MSMED Act (Micro, Small and Medium Enterprise Development Act) 2006 came into
effect from 2 Oct 2006.
4. Credit to MSMEs is part of the priority sector lending policy of the banks. Refer to Lesson 18
(1-3). Any shortfall in the 10 % limit of MSMEs of the 32 % prescribed limit of priority sector
for foreign banks has to be deposited in the SEDF (Small Enterprise Development Fund) set up
by SIDBI.
5. The principal financial institution for promotion, financing and development of the MSME
sector is the SIDBI.
6. If the buyer of the goods fails to make the payment to the supplier within a period of 45 days,
the buyer shall be liable to pay compound interest to the supplier on the amount with monthly
interest at 3 times of the bank rate.
Unit – 23 : Govt Sponsored Schemes
1. The Swarnajayanti Gram Swarojgar Yojna (SGSY) came into effect from 1 April 1999 in the
rural areas of the country.
2. SGSY scheme is funded by the centre and state in the ration of 75:25 and will be implemented
by commercial banks.
3. DRDA (District Rural Development Agencies) provides fund to those self help group who are
in existence for 6 months and have demonstrated the potential of a viable group. This fund is aka
revolving fund.
4. In case of group loan, the group is entitled to a subsidy of 50 % of the project cost, subject to
per capita subsidy of Rs 10,000 or Rs 1.25 lacs whichever is less.
5. Loan applications under the SGSY scheme should be disposed of within the prescribed limit
of 15 days and at any rate, not later than one month.
6. Swarojgaris are covered under the group insurance scheme. The maximum age of Swarojgaris
at the time of sanction has to be kept at 60 years of age.
7. Insurance coverage would be for 5 years or till the loan is repaid.
8. For individual loans up to Rs 50,000 and group loans up to Rs 5 lacs, the assets created out of
the bank loan would be hypothecated to the bank as a primary security.
9. In case of immovable assets (like minor irrigation, dug well, etc), the security created is
mortgage. Where mortgage is also not possible, 3rd party guarantee may be obtained.
10. For all loans (individual or group), in addition to the hypothecation/mortgage/3rd party
guarantee, suitable margin money/other collateral security in the form of an insurance policy;
marketable security/deeds of other property, etc, may be obtained at the discretion of the bank.
11. Project cost includes bank loan plus government security.
12. Subsidy under SGSY scheme will be 30 % subject to a maximum of Rs 7,500.
13. In respect of SC/STs, Subsidy under SGSY scheme will be 50 % subject to a maximum of Rs
10,000 (per capita) or Rs 1.25 lacs whichever is less.
14. Banks should not charge interest on the subsidy portion of the loan amount.
15. All SGSY loans are medium term loans with minimum repayment period 5 years (maximum
9 years).
16. The SJSRY (Swarna Jayanti Shahari Rozgar Yojna) came into effect from 1 April 1997 in all
urban towns in India.
17. The SJSRY scheme is funded by the centre and state in the ration of 75:25.
18. Both urban employed and urban unemployed (no age limit) youth whose annual family
income is below the poverty line and have got education up to 9th standard come under SJSRY
scheme.
19. Project cost up to Rs 50,000 is provided under the SJSRY scheme in case of an individual.
Higher project costs would also be covered in the scheme provided the share of each person in
the project cost is Rs 50,000 or less.
20. In SJSRY scheme, Subsidy would be provided at the rate of 15 % of the project cost, subject
to a ceiling of Rs 7,500 per head.
21. Margin money is 5 % of the project cost in SJSRY scheme.
22. In SJSRY scheme, repayment schedule ranges from 3 to 7 years, after initial moratorium
period of 6 to 18 months (at bank’s discretion).
23. DWCUA (Development of Women and Children in Urban Areas) group shall consists of at
least 10 urban poor women and the subsidy amount would be 50 % of the project cost of
Rs.1,25,000, whichever is less.
24. If in DWCUA, the project cost exceeds Rs 2, 50, 000, the project cost less subsidy
(Rs.1,25,000) and margin money (@ 5 % of the project cost) would be the component of the
bank.
25. The beneficiaries under the SJSRY scheme are identified on the basis of a monthly per capita
income and not by the annual family income (which is the case in SGSY scheme, refer to Point
no 18).
26. The % of women beneficiaries under the SJSRY scheme shall not be less than 30 %.
27. The loans granted under the SJSRY scheme come under priority sector advances and hence
loan applications for amount up to Rs 25, 000 should be disposed of within a fortnight and for
credit limits above Rs 25, 000 within 8-9 weeks.
28. In SJSRY scheme, a loan amount of Rs 50, 000 and group loans up to Rs 3 lacs don’t require
a collateral/guarantee. Besides margin, the borrower would hypothecate/mortgage/pledge to the
bank the assets created out of the bank loan.
29. The PMRY scheme is for unemployed youth between the age of 18-35 years (10 years
relaxation in case of women/PH/SC/ST), who are at least 8th standard pass.
30. PMRY scheme covers those unemployed educated youths whose annual family income is
below 1 lac per annum and the beneficiary should be a permanent resident of the district for 3
years.
31. In case of SHG, PMRY scheme gives subsidy per beneficiary Rs 12,500 subject to a
maximum ceiling of Rs 1.25 lacs.
32. In PMRY scheme, bank’s margin money varies from 5 to 12.5 % of the project cost so that
the total of subsidy and margin money is equal to 20 % of the project cost.
33. The project cost in PMRY scheme is restricted to Rs 2 lacs for business sector and Rs 5 lacs
for industry sector.
34. Margin money in PMRY scheme is 5 to 16.25 % (except in north-eastern states, HP, J&K,
Uttaranchal, where it varies from 5 to 12.5 %) of the project cost so as to make the total of
subsidy and margin money equal to 20 % of the project cost.
35. In PMRY scheme, subsidy eligible is 15 % of the project cost, subject to a maximum of Rs
12,500 per borrower in states other than north-eastern states, HP, J & K, Uttaranchal.
36. In PMRY scheme, the borrower has to hypothecate/mortgage/pledge to the bank assets. The
borrowers will not have to give a collateral security under the industry sector projects with the
cost up to Rs 2 lacs (for business sectors) and up to Rs 1 lac for service sectors.
37. The exemption from collateral is limited to Rs 1 lac per person in case of a partnership in
PMRY scheme.
38. PMRY loans have repayment period from 3 to 7 years after an initial moratorium.
39. In joint ventures/partnerships, the total project cost should not exceed Rs 10 lacs.
40. In SHG, there may be 5-20 educated unemployed youths and there is no upper ceiling on
loan.
41. The exemption from collateral security is Rs 5 lac per borrower in industry sector whereas
the exemption is Rs 1 lac per member in services and industry sector.
42. SLRS (Scheme of Liberation and Rehabilitation of Scavengers) was launched on 22 Mar
1992 and the project cost is limited to Rs 50,000 (the banks would give 32,500, subsidy would be
10,000, and 7,500 would be margin money from Scheduled Caste Development Corporations
aka SCDC) per head. Margin money is up to 15 % of the project cost and rate of interest 4 %.
43. Under the SLRS scheme, the subsidy would be 50 % of the project cost with a ceiling of
Rs.10,000.
44. Loans up to Rs 6,500 are treated as loans under DRI scheme and rate of interest is 4 %. If the
loan sanctioned/disbursed is more than Rs 6,500 such loans will attract a rate of interest
according to the RBI directive.
45. In SLRS scheme, the security for the loan will only be the hypothecation of the assets. The
repayment period is 3-7 years.
46. Loan amount up to Rs 25,000 under SLRS scheme should be disposed of within a fortnight
and for amount exceeding Rs 25,000 within 8-9 weeks.
Unit – 24 : Self Help Groups
1. Registration of SHG is compulsory if the number of members is more than 20 (normally an
SHG has 5-20 unemployed educated members).
2. The SHG should meet weekly or fortnightly and devise a code of conduct (Group
Management Norms) to bind itself.
3. The SHG builds a group corpus fund by voluntary saving from members.
Unit – 25 : Credit Cards, Home Loans, Personal Loans and Consumer Loans
Credit card is the one of the delivery channels of the banking services. It is a small plastic card
issued to users as a system of payment.
It allows its holder to buy goods and services based on the holder's promise to pay for these
goods and services.
The issuer of the card creates a revolving account and grants a line of credit to the consumer
from which the user can borrow money for payment to a merchant or as a cash advance to the
user.
Benefits to Credit Card Holders
(a) They can purchase goods and services at a large number of merchant outlets up to the inbuilt
ceiling credit limit amount without using cash or cheque. This is generally useful in emergencies.
(b) Card holder has a period of interest free credit, depending upon the issuing bank and the card
scheme, i.e. the normal card and gold cards, as offered by various banks. The period of interest
free credit ranges from 15 days to 51 days.
(c) Cash up to a ceiling, within the credit limit is obtainable from the banks' branches or ATMs
(Automated Teller Machines).
Disadvantages to Credit Card Holders
(a) Often results in over spending.
(b) Frauds, due to a loss of card in the intervening periods.
(c) Since signatures are already on the cards, forged signatures could cause a loss to the card
holders. Such kind of a forged signature loss is avoided with the use of photo credit cards.
Parties involved in Credit Card
Cardholder: The holder of the card used to make a purchase; the consumer.
Card-issuing bank: The financial institution or other organization that issued the credit card to
the cardholder. This bank bills the consumer for repayment and bears the risk that the card is
used fraudulently. American Express and Discover were previously the only card-issuing banks
for their respective brands, but as of 2007, this is no longer the case. Cards issued by banks to
cardholders in a different country are known as offshore credit cards.
Merchant: The individual or business accepting credit card payments for products or services
sold to the cardholder.
Acquiring bank: The financial institution accepting payment for the products or services on
behalf of the merchant.
Independent sales organization: Resellers (to merchants) of the services of the acquiring bank.
Merchant account: This could refer to the acquiring bank or the independent sales organization,
but in general is the organization that the merchant deals with.
Credit Card association: An association of card-issuing banks such as Discover, Visa,
MasterCard, American Express, etc. that set transaction terms for merchants, card-issuing banks,
and acquiring banks.
Transaction network: The system that implements the mechanics of the electronic transactions.
May be operated by an independent company, and one company may operate multiple networks.
Affinity partner: Some institutions lend their names to an issuer to attract customers that have a
strong relationship with that institution, and get paid a fee or a percentage of the balance for each
card issued using their name. Examples of typical affinity partners are sports teams, universities,
charities, professional organizations, and major retailers.
Home Loans
Home loans are available to resident Indians and NRIs for the purchase or construction of house
or flats, repairs and renovation of house.
The Procedure and Practices for Home Loans
Target Group: Normally, the target group is the salaried class, professionals, self-employed and
business¬men. Banks fix the age criteria for availing the loan.
Purpose: The purpose of the loan is for the purchase or construction of house or flats, repairs
and renovation of house, and in some banks, for purchase of house sites also.
Quantum of loan: The quantum of eligible loan is fixed based on the gross monthly income/net
monthly income. For this, banks ask for a salary certificate for the salaried class or the Income
tax return for others. Bank also ask for the statement of bank account for a prescribed period.
Age: Banks fix the lower and upper age for availing the loan taking in to consideration the
remaining period of service, in the case of salaried class and the income earning capacity during
the period of loan for others.
Repayment: Most of the banks are giving long repayment period, say 20-25 years. The
repayment will be based on equated monthly instalments (EMI). In case of loan for purchase of a
ready built house, it should be ensured that the remaining life of the building should be longer
than the repayment period allowed, plus a cushion period, says ten years. Normally banks allow
a holiday period for repayment. The holiday period for construction will be more than it is, for
the purchase of ready built house.
Security: Generally, the property purchased or constructed out of the bank loan is taken by way
of mortgage. Sometimes, when the income of the spouse is taken for arriving at the quantum of
loan, his/ her guarantee is also taken as personal security.
Margin: Banks stipulate that a certain percentage of the project cost, say fifteen per cent, is to be
borne by the borrower from his own sources. When the loan is for repairs/renovation, banks
stipulate a higher margin.
Rate of Interest: When compared to the rate of interest for other loans, the rate of interest for
home loan is cheaper. Most of the banks offer a rate of interest below the 'Bench Mark Prime
Lending Rate' (BPLR). Banks also offer a floating rate and a fixed rate option to the borrower.
Documents Required
At the time of applying for the loan, the banks ask for some necessary documents namely;
(a) Agreement of Sale/Sale deed
(b) No Encumbrance certificate NIL EC (for 13 years)
(c) Parent document for 30 years
(d) Approved building plan
(e) Patta (NOC from Housing Board, etc., wherever applicable)
(f) Valuation report from the Bank's approved engineer
(g) Bank statement for last 12 months
Personal Loans
Procedure and Practices for Salary Loans
Target group: Permanent employees with a minimum service/experience of say three years,
with a Govt./quasi Govt./boards/endowments/reputed companies/corporate industrial
establishments, etc. The stipulation of minimum period of service may vary from bank to bank.
Purpose: For meeting of marriage/educational and medical expenses, to celebrate family
functions and for other household expenses.
Eligible Amount: The eligible amount of a loan is calculated based on so many times of the
gross/net salary. While arriving at the quantum of loan, the minimum take home pay say, forty
per cent of the gross salary, will be stipulated after the proposed EMI.
Security: Sometimes banks insist on the guarantee of another person, if there is no collateral
security, or in case, the account is with the branch, a letter giving an undertaking from the
borrower to debit his account for the EMI. When the employer of the borrower sponsors the
loan, h is asked for an undertaking, to the bank to recover the EMI from the salary and remit into
the bank.
Documents: Proof of employment and salary certificate are normally obtained. After sanction of
the loan, banks take the necessary loan documents such as; DPN, salary loan agreement, etc.,
from the borrower and a guarantee agreement from the guarantor, if any.
The rate of interest on this loan will be higher than other loans as there is no collateral security.
Some banks are taking post-dated cheques for the future EMI.
Banks allow 36-60 months as repayment period.
Normally banks levy a certain percentage of the loan amount; say one per cent, as a processing
fee.
Consumer Loans
Target group: Salaried class, pensioners, professionals, self-employed business persons and
other individuals who have regular income.
Purpose: For purchase of consumer durables and white goods like TV, VCR, VCP, air
conditioners, refrigerators, personal computers and accessories, etc.
Eligible amount: While arriving at the quantum of loan, the cost of the article to be purchased
and the margin be brought by the borrower are taken into account. The minimum take home pay,
say forty per cent of the gross salary, shall also be ensured after the proposed EMI.
Security: Hypothecation of the article purchased out of the bank loan.
Margin: Normally a margin of 10-20 per cent is stipulated.
Repayment: Banks allow a thirty six to sixty months repayment period.
Documents: The documents to be obtained are: salary certificate for three months for self and
spouse (if spouse income is also taken into account for arriving at the eligibility) IT returns/Form
16 for two to three years in case of professionals, businessmen, Self-employed persons.
Quotations of the articles selected from a reputed dealer. Statement of account/passbook,
showing one year's transactions. Some banks are taking post-dated cheques for the future EMI.
After sanction of the loan, banks take necessary loan documents such as DPN, hypothecation
agreement, etc., from the borrower and a guarantee agreement from the guarantor if any.
Normally banks levy a certain percentage of the loan amount, say one per cent, as a processing
fee.
Unit – 26 : Documentation
1. There are 3 types of documents taken by a bank for a loan – DPN, agreement, and form.
2. DPN (Demand Promissory Note) is a document which a bank takes when there is no fixed
period for the repayment of loan.
3. In DPN, the borrower makes a promise to the banker to repay the loan amount on demand
with agreed rate of interest.
4. DPN must be stamped as per Indian Stamps Act.
5. An agreement includes the amount of loan, rate of interest, rate of penal interest, % of margin,
period of repayment, rights of the bankers in case of default of loan, details of security/securities
charged, etc.
6. The agreement must be stamped.
7. Forms are neither promised nor agreement. They are obtained to specify the intention of the
borrower. For ex, when a loan is granted against the security of a FD standing in joint names,
one of them gives an authorization to the other to raise a loan on the deposit. Such an
authorization is taken in a form.
8. For correct documentation, the steps followed are – selection of correct set of documents,
stamping, filling, execution, and legal formalities.
9. The cancellation of adhesive stamp is done as per Section 12 of the Indian Stamp Act.
10. In case of advances to limited companies against its assets, the required forms are to be
presented to the Registrar of Companies with the 30 days from the date of execution.
11. In case of creation of registered mortgages, the mortgage deed is presented for registration
before the Registrar of Assurances within 4 months from the date of execution of the deed.
12. The documents submitted to the bank don’t have perpetual life, the provision of Limitation
Act apply to them. The Limitation Act prescribes the period of limitation for different types of
documents.
13. The limitation period for a DPN is 3 years from the date of execution. It means if the loan is
not repaid within 3 years, the bank has to get fresh documents for extending the period.
14. If the borrower or his duly authorized agent makes any part payment towards the loan before
the expiry of period of limitation, then the period of limitation is extended by one more period
from the date of such part payment.
15. Securitisation is the process of acquisition of large NPA loan or portfolio of loans such as
housing, by Securitisation or Reconstruction Co from a bank or financial institution on mutually
agreed terms and conditions.
Unit – 27 : Different Modes of Charging Securities
1. Assignment is transfer of a right, property or a debt. The transferor is called assignor and the
transferee is called assignee.
2. A borrower may assign the book debt, money due from government department and LIC as
security for an advance.
3. Under the provision of the Insurance Act, an LIC is assignable by an endorsement on the back
of the policy or by a separate deed of assignment, but notice of such assignment must be given to
the insurer by the assignee or assignor.
4. Under section 171 of the Indian Contract Act, lien is the right of the banker to retain (and sell
if need arises) possession of goods and securities owned by the debtor until the debt due from the
latter is paid.
5. Lien is an implied (understood) pledge.
6. Set-off means adjusting the debit balance in one account of the debtor with the credit balance
in another account of the same debtor. It is also applicable in case of partnership accounts.
7. Lien and set-off both cannot be exercised at a time.
8. Hypothecation is a charge created on movable property without delivery of possession of the
property.
9. Hypothecation differs from pledge because goods remain in the possession of the borrower in
hypothecation.
10. Hypothecation transforms into pledge when the possession of the goods is transferred to the
creditor.
11. Hypothecation differs from mortgage because mortgage relates to immovable property but
hypothecation relates to movables. Also, in hypothecation, there is only obligation to repay
money and no transfer of interest but in mortgage, there is transfer of interest in the property to
the creditor.
12. Pledge means bailment of goods for purpose of providing security for payment of debt or
performance of a promise (as per section 172 of the Contract Act 1872).
13. In pledge, there is actual or constructive (no physical) delivery of goods to the Pawnee (who
takes the goods as security).
14. 6 types of mortgage are –
a. Simple mortgage – mortgage is by deposit of title deeds, mortgagee has a right to proceed
against the property mortgaged and also personally against the mortgagor
b. Mortgage by conditional sale – possession of mortgaged properties is given
c. Usufructuary mortgage - possession of mortgaged properties is given
d. English mortgage - possession of mortgaged properties is not given
e. Mortgage by deposit of title deeds – it is not required to be created by way of a deed and
doesn’t require registration
f. Anomalous mortgage
15. Mortgage is to be created by way of deed and requires to be registered under the Registration
Act.
16. Limitation period for filing a suit for sale of mortgage property is 12 years from the date
mortgage debt becomes due.
17. Limitation period for filing a suit for foreclosure of mortgage property is 30 years from the
date mortgage debt becomes due.
18. Bankers generally prefer simple mortgage and mortgage by deposit of title deeds.
Liner Definition:
19. Pledge: When lender possess movable security.
20. Hypothecation: When lender has a charge against movable security, which is not in lender's
possession.
21. Mortgage: when lender has a charge against immovable property, not in its possession.
22. Lien: not necessarily the security is in your possession, but we have frozen it for any
debit/withdrawal transaction.
Unit – 28 : Types of Collaterals and their Characteristics
1. Security is of two types – primary and collateral.
2. Primary security is one that is regarded as the main cover for an advance, generally assets
against which advance are made. Ex stocks for cash credits, machinery for term loans.
3. Collateral security is security other than primary security.
4. Mortgage of immovable property is either primary or collateral.
5. When doing mortgage, encumbrance certificate is taken for generally 13 years to check no
encumbrance exists on the property.
6. The nature of charge created on lands and buildings is mortgage.
7. The nature of charge created on goods may be pledge or hypothecation.
8. In the case of key cash credit, the nature of charge created is pledge because in this case, the
possession of goods is transferred to the banker.
9. In the case of open cash credit, the nature of charge created is hypothecation because in this
case, the possession of goods is not transferred to the banker.
10. In both the key cash credit and open cash credit (means in either case of pledge or
hypothecation), the title in the goods is not transferred to the bank.
11. The valuation of the stocks is done on the basis of cost price or market price whichever is
less.
12. Documents of title to goods means a document used in the ordinary course of business as a
proof of possession or control of goods authorising or purporting (claiming) to authorise either
by endorsement or delivery (as per section 2(4) of Sales of Goods Act).
13. Goods represented by the documents are transferrable by endorsement and/or delivery of the
documents. It looks like negotiable instruments but actually they are quasi-negotiable
instruments.
14. Examples of documents of title are bill of lading, dock warrant, warehouse-keepers
certificate, railway receipts, delivery orders, etc.
15. LICs are taken either as primary or collateral security.
16. Nomination under the LIC is automatically cancelled in the event of the assignment of the
policy.
17. The nature of charge created while making advances against shares is a pledge.
18. Banks provide either demand loan or an over draft against the security of shares.
19. Shares should be in demat form and should be quoted in a recognised stock exchange.
20. Advances are granted against fully paid shares only.
21. No loan can be granted against the security of a private limited company.
22. No banking company can hold shares in any company of an amount exceeding 30 % the paid
up share capital of that company or 30 % of its own paid up share capital and reserves whichever
is less (BR Act 1949, section 19 (2)).
23. If the securities (of shares, debentures and PSU bonds) are in physical form, loans against to
individuals should not exceed the limit of Rs 10 lac per borrower.
24. If the securities (of shares, debentures and PSU bonds) are in demat form, loans against to
individuals should not exceed the limit of Rs 20 lac per borrower.
25. ESOP (Employees Stock Option Plan) is a scheme under which banks provide loan to
employees for purchasing shares of their own companies.
26. Under ESOP, an employee can purchase to the extent of 90 % of the purchase price of shares
or Rs 20 lac, whichever is less.
27. In case of advances against shares, a uniform margin of 50 % shall be applicable on all
advances/financing of IPOs/issue of guarantees. And within this margin of 50 %, a minimum
cash margin of 25 % shall be maintained in respect of guarantees issued by banks for capital
market operations.
28. Banks also give loans under book debts.
29. Book debts mean account receivables (total of debit balance in the purchaser’s account).
30. Book debts can be financed by: factoring (lesson 7), forfeiting (outright i.e. complete
purchase of book debts, and overdraft and cc against hypothecation of book debts.
31. Age of the book debts should be 3-6 months old, but not later.
32. Margin of 50 % is maintained in book debts.
33. Banks may provide advances against the security of time deposits such as FD or RD.
34. The nature of facility granted against the security of term deposits may either be a loan or an
overdraft.
35. The nature of charge created while granting loan against time deposits is a pledge.
36. Normally loans up to 90 % of the deposit amount/accrued value of the deposit is provided.
37. The ROI charged on the loan would be 1 or 2 % above the interest rate offered on the
deposits.
38. Loans given to a sole proprietor against deposit in the name of the proprietor concern should
NOT be treated as 3rd party loan.
39. Loans given to a partner against deposit in the name of the firm should be treated as 3rd party
loan and interest should be charged at the commercial rate.
40. If a company seeks loan against its deposit, a board resolution authorising the company to
raise the loan should be obtained. The charge of pledge need not be registered with the ROC.
41. A deposit held under ‘Capital Gain Scheme’ is not eligible for loan.
42. The nature of charge created under the security of gold ornaments is a pledge.
43. No loan can be given against the security of pure gold.
44. Around 30 % margin is kept on the market value of the ornaments.
45. The nature of charge created under ‘Supply Bills’ is assignment
Unit – 29 : Non-Performing Assets
The prudent guidelines were first issued by RBI in the year 1991 implemented wef 01.04.1992
on recommendations of Narasimham committee covering, income recognition, asset
classification and provisioning.
1. Prudential norms prescribed by RBI include norms relating to Accounting, Exposure, and
Capital Adequacy.
2. Prudential accounting norms are income recognition, asset classification and provisioning.
CLASSIFICATION AS NPA
Term Loan - If Interest and/ or installment of principal remain overdue for a period of more
than 90 days
CC/Overdraft - if the account remains 'out of order or the limit is not renewed/reviewed within
180 days from the due date of renewal. Out of order means an account where
(i) the balance is continuously more than the sanctioned limit or drawing power OR
(ii) where as on the date of Balance Sheet, there is no credit in the account continuously for 90
days or credit is less than interest debited OR
(iii) where stock statement not received for 3months or more.
Bills - If the bill remains overdue for a period of more than 90 days from due date of
payment
Agricultural accounts – (i) if loan has been granted for short duration crop: interest and/or
installment of principal remains overdue for two crop seasons beyond the due date.
(ii) if loan has been granted for long duration crop: interest and/or installment of principal
remains overdue for one crop season beyond due date.
Decision about crop duration to be taken by SLBC.
Loan against FD, - Advances against term deposits, NSCs eligible for surrender, IVPs,
NSC, KVP, LIP KVPs and life policies not treated as NPAs provided sufficient margin
is available.
Advances against gold ornaments, govt securities and all other securities are not covered by this
exemption.
Loan guaranteed - Loan guaranteed by Central Govt not treated as NPA for asset
by Government classification and provisioning till the Government repudiates its
guarantee when invoked. Treated as NPA for income recognition.
Consortium advances - Asset classification of accounts under consortium should be based on the
record of recovery of the individual member banks.
ASSET CLASSIFICATION
1. Asset Classification to be borrower-wise and not facility-wise
2. Assets classified into Standard, Sub standard, Doubtful, Loss. Except standard all others are
NPAs.
3. When an account becomes NPA it is called Sub standard asset.
4. An account remains sub standard up to 12 months from the date of becoming NPA
5. Doubtful Assets : An asset is to be classified as doubtful, if it has remained NPA or sub
standard for a period exceeding 12 months.
6. Loss Assets : A loss asset is one where loss has been identified by the bank or internal or
external auditors or the RBI inspection but the amount has not been written off wholly.
7. When an account is classified as Doubtful or Loss without waiting for 12 months: If in an
account which was secured in the beginning, the realizable value of tangible security falls
below10%of the outstanding, it should be classified loss asset without waiting for 12months
8. If the realizable value of security is 10% or above but below 50% of the outstanding, it should
be classified as doubtful irrespective of the period for which it has remained, NPA.
PROVISIONING NORMS
1. Provisioning is made on all types of assets i.e. Standard, Sub standard, Doubtful and loss
assets.
2. Standard Assets :
a. Direct advance to agriculture or Micro and Small Enterprise (Not medium) : 0.25%of
outstanding;
b. Commercial Real Estate: 1%of outstanding;
c. Housing Loans with teaser interest rates: 2%of outstanding; All others: 0.4%of outstanding
d. The provisions on Standard Assets is shown as 'Contingent Provisions against Standard
Assets' under 'Other Liabilities and Provisions Others' in Schedule 5 of the balance sheet.
3. Sub Standard Assets:
a. Secured sub standard: 15% of outstanding balance without considering securities available.
b. Unsecured sub standard: if the loan was unsecured from the beginning: 25%of outstanding
balance.
c. If unsecured sub standard for infrastructure: 25%of outstanding balance.
d. Unsecured exposure means exposure where the realisable value of the security, as assessed by
the bank/approved valuers/Reserve Bank's inspecting officers, is not more than 10 percent, abinitio,
of the outstanding exposure.
4. Doubtful Assets:
1. Unsecured portion:100%
2. Secured portion: 25% to 100% depending on the period for which account is doubtful
Age of Doubtful Asset Provision as % of secured portion
Doubtful up to 1 year D1 25% of RVS (Realisable value of security)
Doubtful for more than 1 year to 3 years D2 40% of RVS
Doubtful for more than 3 years; D3 100% of RVS
5. Loss Assets: 100%of the outstanding amount.
6. If loan is guaranteed by ECGC, CGFT or CGFLHS, provision not on guaranteed portion
7. Provision on advance against FD, NSC, LIP, KVP as per their asset classification.
8. Overall provisions: Provisioning coverage ratio, including floating provisions, should not be
less than 70 per cent.
9. Provisioning coverage ratio is the ratio of provisioning to gross NPAs.
10. Provision on Standard account to be kept as part of Other Liabilities in Schedule-5 of bank's
balance sheet.
11. Provision on Standard accounts to be done on Global balance and for NPA accounts on
Gross Balance
12. For Doubtful accounts, provision to be done separately for secured portion and unsecured
portion of total balance in the account.
13. In case of standard and sub standard assets, provision is on outstanding balance without
bifurcating the balance into secured or unsecured.
14. Floating provisions can be deducted from Gross NPAs or treated as part of Tier Il capital but
not both.
UPGRADATION OF LOAN ACCOUNTS CLASSIFIED AS NPAs
1. if arrears of interest and principal are paid by the borrower in the case of loan accounts
classified as NPAs, the account may be classified as 'standard' accounts immediately.
2. Restructured accounts: After one year after the date when first payment of interest or of
principal, whichever is earlier, falls due, subject to satisfactory performance during 12 months
period from the date of starting payment after moratorium period.
Unit – 30 : Financial Inclusion & Financial Literacy
FINANCIAL INCLUSION
Financial inclusion or inclusive financing is the delivery of financial products, at affordable costs
to sections of disadvantaged and low-income segments of society. It is in contrast to financial
exclusion, where those services are not available or affordable.
As per United Nations, the goals of financial inclusion is, to ensure access to a full range of
financial services, at a reasonable cost, to ensure continuity and certainty of investment.
India: RBI set up the Rangarajan Committee in 2004 to look into financial inclusion.
Financial inclusion first featured in 2005 when Mangalam became the first village in India where
all households were provided banking facilities.
RBI initiatives:
1. Opening of no-frills accounts (replaced by basic saving bank accounts)
2. Relaxation KYC norms for small deposit accounts.
3. Allowing engaging business correspondents (BCs)
4. Effective use of information and communications technology (ICT), to provide doorstep
banking services
5. Implementation of electronic benefit transfer ( EBT) by leveraging ICT-based banking 6. Issue
of general credit cards for amount up to Rs.25000
7. Simplified branch authorization for tier III to tier VI centres (population of less than 50,000)
under general permission
Financial Inclusion Index: On June 25, 2013, CRISIL, launched an index (Inclusix) to measure
the status of financial inclusion in India. Inclusix is a one-of-its-kind tool to measure the extent
of inclusion in India, in each of the 632 districts. It is a relative index on a scale of 0 to 100, and
combines 3 critical parameters of basic banking services : branch penetration, deposit
penetration, and credit penetration, into one metric.
RBI Roadmap for Financial Inclusion
Under RBI's earlier roadmap (of Sep 2010) 74,414 unbanked villages were allocated to banks for
opening of banking outlets. Banks opened banking outlets in 74,199 (99.7%) villages by March
2012.
New roadmap: To take financial inclusion to the next stage of providing universal coverage and
facilitating Electronic Benefit Transfer, banks have been advised) to draw up FIP for 2013-16
and disaggregate the FIPs to the controlling office and branch level. RBI advised State Level
Bankers' Committees (SLBCs) to prepare a roadmap covering all unbanked villages of
population less than 2000 and notionally allot these villages to banks for providing banking
services, in a time-bound manner to provide with at least one banking outlet. The lead banks are
to constitute a Sub-Committee of the District Consultative Committees (DCCs) to draw up a
roadmap for provision of banking services in every village having a population below 2000
(2001 census) for providing banking services, in a time bound manner.
DIRECT BENEFIT TRANSFER (DBT) SCHEME
DBT is being rolled out in a phased manner (43 districts taken up in the first phase from January
1, 2013 and extended to 78 more districts from July 1, 2013). Eventually, all districts in the
country would be covered under the DBT scheme.
To facilitate DBT for delivery of social welfare benefits by direct credit to the bank accounts of
beneficiaries, banks were advised by RBI (May 10, 2013) to:
1. open accounts for all eligible individuals in camp mode with the support of local government
authorities,
2. seed the existing -accounts or the new accounts opened with putAadhaar numbers and in
place an effective mechanism to monitor and review the progress in the implementation of DBT.
SLBC Convenor Banks and Lead Banks should institute a monitoring and review mechanism to
periodically assess and evaluate the progress made in the implementation.
The SLBC Convenor banks shall submit a monthly statement of district wise progress made in
implementing DBT from the month ended April 30, 2013 by the 10th of the succeeding month to
respective RBI Regional Office.
RBI initiatives :
(1) RBI has undertaken a project titled 'Project Financial Literacy' to disseminate information
regarding banking concepts to various target groups, such as, school and college going children,
women, rural and urban poor, defence personnel and senior citizens.
(2) RBI launched a financial education website on November 14, 2007.
(3) RBI circulated a comprehensive Financial Literacy Guide for conduct of Financial Literacy
Camps & Financial Literacy. Material as also a Financial Diary and a set of 16 posters.
In terms of RBI circular dated Jun 06, 2012, all the Financial Literacy Centres and rural branches
are required to prepare an annual calendar of locations for conduct of outdoor Financial Literacy
Camps.
At every location, the program should be conducted in 3 stages to be spread over a period of 3
months comprising of 3 sessions of minimum 2 hours each plus a visit to ensure timely delivery
of cards. 2nd, session is to be conducted a fortnight after first session. After 15 days of the
second session, branch officials should visit the village to ensure delivery of cards to the
villagers. They will also make sure that the BC has started operations and villagers are able to
make transactions. 3rd Session is to be conducted, 2months after holding of second session.
PRADHANMANTRI JAN DHAN YOJANA
Prime Minister Narendra Modi on August 28 launched his government's mega scheme 'Pradhan
Mantri Jan Dhan Yojana', an ambitious scheme for comprehensive financial inclusion.
According to Prime Minister, in a country where 40 per cent of the population does not have
access to banking services, this programme would mark the beginning of the end of "financial
untouchability" and rid the country of poverty. The scheme has been started with a target to
provide 'universal access to banking facilities'. On the inaugural day, a record 1.5 crore bank
accounts were opened across the country, the largest such exercise on a single day possibly
anywhere in the world. Currently, around 41% of the population is unbanked, of which 33% are
in urban areas and 46% in rural. Salient points of Prime Minister’s ambitious Jan Dhan Yojana
are given below:
1. About 15 million accident insurance policies done on a single day and same number of bank
accounts opened.
2. Programme held at around 77,000 locations.
3. Target to cover 7.5 crore households with at least one account will be achieved by Jan 26,
2015.
4. Coverage of all households with at least one basic banking account.
5. Account holders will be provided zero-balance bank account with RuPay debit card, in
addition to inbuilt accidental insurance cover of Rs 1 lakh.
6. Additional Rs.30,000 free life assurance cover for those opening bank accounts before Jan 26,
2015.
7. Holders can avail overdraft of Rs 5,000 subject to satisfactory operations of the account for six
months.
8. Universal access to banking facilities for all households through a bank branch or a fixed point
business correspondent called "BankMitra".
9. Financial literacy to be imparted up to village level.
10. Under the Jan Dhan Yojana, all benefits from the Centre/states/local bodies are proposed to
be transferred to the accounts of beneficiaries.
11. Platform has been built by the National Payment Corporation of India that connects all banks
and all telephone networks in the country. With the introduction of new technology introduced
by National Payments Corporation of India (NPCI), a person can transfer funds, check balance
through a normal phone.
12. Mobile banking for the poor would be available through National Unified USSD Platform
(NUUP) for which all banks and mobile companies have come together.
13. The second phase of rollout will involve providing micro-insurance to people and schemes
like 'Swavalamban'.
14. Households being targeted instead of only being villages targeted earlier.
15. For the entire exercise, the existing banking network will be strengthened - it will rope in an
additional 50,000 business correspondents and set up about 7,000 branches and 20,000 new
automated teller machines, in the first phase.
16. PMJDY also aimed at eliminating corruption as it would facilitate routing of subsidies
directly into the accounts of intended beneficiaries.
17. Presently, one account is being opened for one adult of each household and by 2018, the
mandate is to make it two per household, with the compulsory inclusion of the lady of the house.
18. The government would institute a credit guarantee fund post-August 2015.
FINANCIAL LITERACY
The financial literacy or financial education stands for ability to know and effectively use
financial resources to enhance the well-being and economic security of oneself, one's family, and
one's business.
It primarily relates to personal finance that enables individuals to take effective action to improve
their overall wellbeing and avoid distress in financial matters.
Benefits: Financial literacy promotes financial inclusion and ultimately financial stability. In
India, its need is even greater, due to low levels of literacy and the large section of the
population, remaining out of the formal financial set-up.
JAIIB - Principles & Practices of Banking-Module-C - Banking
Technology
Unit – 31 : Essentials of Bank Computerisation
The concept of Bank Computerisation practically started after 1980-81 and more precisely
gained pace in the year 1983-84, after setting up a committee in the year 1983 under the
chairmanship of the then Deputy Governor of RBI, Dr. C. Rangarajan.
Need for Computerisation
The four major objectives of computerisation in banking are to improve:
(a) customer service
(b) housekeeping
(c) decision-making
(d) productivity and profitability.
Stand-alone Computer System
The stand-alone computer system is used by only one person at a time.
Stand-alone systems are best suited for the decision-making process, which involves processing
and analysis of data.
Today's stand-alone systems are also capable of handling multimedia, high-quality graphics, fax
messages, etc.
Multi-user Systems
The multi-user systems are computers on which several people can work at the same time.
Mini computers, Main Frame Computers, Micro-computers and the more powerful Super
Computers all fall under this category.
Multi-user Computer Networking
In such a system computers are based on the centralised processing concept.
All information is kept and processed at the main central machines and various terminals are
attached to the main computer.
The main computer can store a huge amount of information and possesses high-processing
speeds enabling a large number of users to be connected to the main central computer.
Each user has his/her own terminal.
Most of the banking systems are developed using the centralized computing concept.
The advantages of using a centralised data processing system :
(a) availability of corporate level information at one location is possible
(b) cost of acquiring hardware, software and other infrastructure is more profitable than
acquiring the same for individual departments
(c) due to the high volume of data processing the computing resources can be fully utilised
(d) technical manpower can also be efficiently managed at a central level
(e) costly resources like leased telephone lines, satellite links, etc., can be shared among the
various departments Branch-level Computerisation
Computerisation at the branch level can be used to:
(a) Provide better and speedy customer service
(b) Improve housekeeping services
(c) Analyse the branch-level data for decision making
(d) Generation of various reports.
Total Branch Automation
This is a real time online banking.
Whenever a transaction is entered through a terminal, the transaction is recorded, verified and
authenticated and all corresponding updates are reflected instantly.
Various outputs such as ledger extracts, passbooks, vouchers, statements of accounts of
customers, etc., are generated online.
It is possible to provide the 'single window' transactions concept. That means a customer can
approach any counter for completing all his or her transactions.
Off-site ATMs are also linked to the branch system to enable the customer to bank
anytime/anywhere.
Software and hardware requirements depend upon the size of the branch.
Computerisation at Regional/Circle/Zonal Office
RO/ZO acts in between branches and the head office.
The most common tasks performed by the regional office/zonal office are:
(a) branch profile
(b) inter-branch reconciliation
(c) credit monitoring
(d) personnel data management, etc.
Computerisation at Head Office Level
The head office of a bank is responsible for bank level planning, and control functions, policy
decisions. The head office activities are divided into different functional areas like:
(a) operations
(b) planning
(c) personnel
(d) international business
(e) services, etc.
The computerisation at various functional areas may include application areas:
(a) personnel management and administrative support
(b) funds management
(c) investment portfolio management
(d) branch profiles
(e) credit information system, etc.
Local Area Network (LAN)
The computer network that links computers and peripherals within a localised area say, within a
building is known as LAN.
Generally, LAN will not extend beyond 150 metres. However, it can be up to a maximum spread
of 1 km and the number of devices supported may also vary from 2 to as many as 1000.
In LANs, each independent system is known as a node and when such nodes are interconnected,
it is known as a LAN.
Usually, there will be one central node (Server) providing and controlling all the services of the
network.
The client nodes route their requests to the server and obtain the necessary services.
Topology (Layout)
The way in which the devices are interconnected is known as topology
Bus Topology
All devices on the network are connected to a single continuous cable.
Transmission from any station travels the length of the bus in both directions and is received by
all other stations.
The main advantage of bus topology is that it is quite easy to set up.
Further, if one station on the LAN fails, it will not affect the rest of the network
Data transmission is possible in one direction only
The breakdown of any one station on the ring can disable the entire LAN.
Star Topology
In a star topology, the central node is often the master.
Each of the other nodes is joined to the master by separate links.
It cannot handle large traffic as every transaction has to pass through the central node.
However, if one node fails, it will not affect the network.
Protocols
The protocols are the rules for communication between similar modules of processes, usually in
different nodes.
Protocols define message formats and the rules for message exchange.
It controls priority and sequence of transmission, errors in transmission, and the process of
beginning and concluding conversion.
The network protocols depend on the adapters. Some of the commonly used types of adapters
are Ethernet and Token-Ring
A multiplexer is used to receive signals from several communication lines and pass on to one
communication line and vice versa.
Network Operating System:
The function of the networking software is to set up some computers as hosts, or servers, and
some computers as clients to those hosts.
The servers manage the printer sharing, file sharing and communications link sharing to their
clients.
The advantages of using LANs in banks are that:
(a) The expensive resources such as computer hardware and software can be shared by several
users. This brings down the overall cost of computerisation.
(b) The information stored on the host computer is available to all users of the system. Therefore,
there is no necessity of duplication of databases.
(c) Since all the terminals are intelligent terminals, the processing load is shared between the
various machines and there is no overloading on any single machine.
There are also a few shortcomings of a LAN, such as:
(a) Complicated software has to be installed for data management.
(b) Security risks are higher, since each user access the host computer independently.
(c) Maintenance cost of such a system is high, since it has to be done frequently.
Wide Area Network (WAN)
Wide Area Networks (WAN) are defined as a large-scale computer network spread over a span
of sizeable geographic area, normally utilising the telecommunication network.
In the banking sector, the WANs are generally used to interconnect branches with the regional
offices, and regional/zonal offices to head office, etc.
UNINTERRUPTED POWER SYSTEM (UPS)
Uninterrupted power system provides clean and reliable AC power to the computer systems
protecting them from power blackouts, brownouts, swells, sags, surges, and interface.
In case of a power failure, the UPS attached with the file server automatically takes over the
power supply to the file server or to the main computer to eliminate the chance of data loss.
CORE BANKING
In core banking, there is a central database for the bank and transactions are done centrally,
online. It offers integrated products and services to customers round the clock.
Business Components
(a) To have retail customer banking modules
(b) Deposits, loans, bills, remittances, locker, clearing, etc.
(c) Trade finance/forex modules
(d) Government business modules
(e) To have corporate finance and service branch modules
(f) To have enhanced MIS modules
(g) To have modules for business intelligence
(h) To integrate with the existing ATMs, tele-banking, debit card, kiosks and other delivery
Channels
(i) To have any branch banking, Internet banking and call centre
(j) To interface with existing corporate systems like treasury, IBR, centralised accounting
system, HRMS, ALM, credit appraisal and management, credit monitoring and NPA
management, etc.
(k) To interface with systems like NDS, SFMS, RTGS, CFMS, etc.
Benefits
(a) Enables the establishment of a reliable centralised data repository for the bank
(b) Facilitates data warehousing and data mining technologies for business intelligence
(c) Easy implementation of integrated customer centric services like online ATMs, telebanking,
internet banking, any branch banking, kiosk banking, cash management services, etc.
(d) Enables centralised management information, decision support and executive information
systems
(e) Efficient and effective MIS, ALM, risk management, etc., using the central data pool
(f) Enables centralised management and control with centralised data
(g) Standardisation of the branch automation software using a single version. Quick adoption of
software changes as changes are done only at the central site
(h) Facilitates business process re-engineering (BPR) to streamline the existing processes
(i) Relieves branches of jobs like data backup, MIS generation, etc.
(j) Requires infrastructure at the central location, backup location and at branches
(k) Servers are not mandatory at branch locations
(1) Attracts higher investment in the beginning
(m) Cost of implementation for further branches and delivery channels relatively cheaper
(n) Core infrastructure can be used for future expansions
(0) No extra cost for implementation of SFMS, RTGS, CFMS, etc.
Unit – 32 : Payment Systems and Electronic Banking
Automated Teller Machines (ATMs)
Automated Teller Machines (ATMs) are primarily used for performing some of the banking
functions such as the withdrawal of cash or the deposit of cash/cheque, etc., by using an ATM
card.
The committee headed by Dr. C. Rangarajan recommended the setting up of ATMs in India.
Convenience of ATMs
To the Customers:
(a) 24 x 7 access availability
(b) Less time for transactions (less queue)
(c) Privacy in transactions
(d) Any branch/anywhere banking enabled
(e) Acceptability of card across multiple bank ATMs, even foreign tourists can access
Maestro/VISA / ATMs
To the Bank:
(a) Cost of setting up ATMs is lower than setting up a branch
(b) Migration of the routine transactions to the ATMs frees the bank staff for more
productive work
(c) ATMs serve as the crucial touch point for cross-selling of the bank's products
(d) Enables the bank to display products on the screen and serves as a media for publicity
for the bank
(e) Less hassle in handling cash.
The following components of the ATM provide the customer interface:
(a) Video Display Monitor
(b) Keyboard/Keypad
(c) Touch Screen
(d) Slots: There are slots in the ATM for various purposes as detailed below:
(i) Card Reader (ii) Cash Dispenser
(iii) Envelope Dispenser (iv) Deposit Slot
HWAK (The Intelligent Auto-teller and Netware Management System)
Intelligent auto-teller systems are a special breed of auto-teller machines capable of thinking for
themselves, that means they are fast, impose less demands on your banking systems and serve
the customers more like a personal banker than less sophisticated auto teller systems.
HWAK provides unsurpassed service even without benefit of a reliable communication network.
Benefits of HWAK are:
(a) Customer satisfaction.
(b) High availability
(c) Online and offline auto-recovery
(d) Anytime full banking service
(e) Low cost, shorter queues and less number of tellers with ease of use
(f) Quick and early implementation
(g) Enhanced security and audit control
(h) Network management
(i) Predictable cost of ownership
(j) Comprehensive 'One Stop' autobanking.
White Label ATM (WLA)
Traditionally, Automated Teller Machines (ATMs) have respective bank’s logo. So just by
looking, this is SBI’s ATM, this is ICICI’s ATM and so on.
But White label ATM doesn’t have such Bank logo, hence called White label ATMs.
RBI has given license / permission to non-bank entities to open such ATMs.
Any non-bank entity with a minimum net worth of Rs.100 crore, can apply for white label
ATMs. (not just NBFC, any non-bank entity can apply.)
Late 80s: first ATM in India; 2012: RBI issues guideline for White label; 2013: RBI gives
license/permission.
Tata Communications Payment Solutions Limited =the first company to get RBI’s permission to
open White label ATMs.
They started their chain under brandname “Indicash”.
Other White label= Muthoot Finance, Srei Infra., Vakrangee Software, Prizm Payments, AGS.
More than 15 companies given such permission.
National Payments Corporation of India (NPCI)
National Payments Corporation of India (NPCI) was incorporated in December 2008 and the
Certificate of Commencement of Business was issued in April 2009.
It has been incorporated as a Section 25 company under Companies Act and is aimed to operate
for the benefit of all the member banks and their customers.
Presently, there are ten core promoter banks ( State Bank of India, Punjab National Bank, Canara
Bank, Bank of Baroda, Union bank of India, Bank of India, ICICI Bank, HDFC Bank, Citibank
and HSBC).
RuPay
The Indian market offers huge potential for cards penetration despite the challenges. RuPay
Cards will address the needs of Indian consumers, merchants and banks. The benefits of RuPay
debit card are the flexibility of the product platform, high levels of acceptance and the strength of
the RuPay brand-all of which will contribute to an increased product experience.
Lower cost and affordability :
Since the transaction processing will happen domestically, it would lead to lower cost of clearing
and settlement for each transaction. This will make the transaction cost affordable and will drive
usage of cards in the industry.
Customized product offering :
RuPay, being a domestic scheme is committed towards development of customized product and
service offerings for Indian consumers.
Protection of information related to Indian consumers :
Transaction and customer data related to RuPay card transactions will reside in India.
Provide electronic product options to untapped/unexplored consumer segment :
There are under-penetrated/untapped consumers segments in rural areas that do not have access
to banking and financial services. Right pricing of RuPay products would make the RuPay cards
more economically feasible for banks to offer to their customers. In addition, relevant product
variants would ensure that banks can target the hitherto untapped consumer segments.
Inter-operability between payment channels and products :
RuPay card is uniquely positioned to offer complete inter-operability between various payments
channels and products. NPCI currently offers varied solutions across platforms including ATMs,
mobile technology, cheques etc and is extremely well placed in nurturing RuPay cards across
these platforms.
Credit Card
It allows the cardholder to pay for goods and services based on the holder's promise to pay for
them.
The issuer of the card creates a revolving account and grants a line of credit to the cardholder,
from which the user can borrow money for payment to a merchant or as a cash advance.
The size of most credit cards is 3 3⁄8 × 2 1⁄8 in (85.60 × 53.98 mm).
It allows the consumers a continuing balance of debt, subject to interest being charged.
Charge Card
Transactions are accumulated over a period of time, generally a month and the total amount
charged, i.e. debited to the account.
The credit card holder is given about 25 to 50 days' time to credit his account in case there are
insufficient funds in his account at the time of debit.
Since the transactions are accumulated, it is only charged, i.e. not debited to the account
immediately, such cards are called charge cards.
Debit Card
A debit card (also known as a bank card or check card) is a plastic payment card that provides
the cardholder electronic access to their bank account(s).
Payments using a debit card are immediately transferred from the cardholder's designated bank
account
Electronic Purse
Type of smart card which, with an embedded microchip, provides multiple options, such as debit
card or credit card type payments.
Smart card
A smart card is a payment card embedded with a computer chip, essentially functioning like a
mini-computer on a card. The memory and the computing power of the chip on the card could
transform payments in many ways. The chip, a true technological breakthrough, holds at least 80
times more data than the magnetic stripe on existing credit cards.
Unlike the magnetic stripe, the chip can process data as well as store it, and because each
program on the chip runs on independent software, several different programs can operate on the
same card at the same time.
An added bonus: the smart card is a more secure method of payment that protects the
cardholder's account information from fraudulent use.
Electronic Cheque
The smart card can be used during electronic fund transfer at the point-of-sales (EFTPOS). At a
retailer's checkout, the card is placed in the reader, where it automatically goes through
authentication sequences.
Electronic Cash
Funds can be loaded into a card for use as cash. This electronic cash can then be used for making
purchases
Electronic Token
The principle here is that a prepaid area is set aside to store electronic units of time or electronic
tickets, etc., for a specific service or item. Magnetic strip cards are often used with public
telephones, parking meters and vending machines.
Anytime Banking
ATMs have eliminated the time limitations of customer service, and offer a host of banking
services, including deposits, withdrawals, requisitions, instructions and transfers. HSBC Ltd., for
instance, has taken the concept of remote banking further by providing a service called Hexagon,
which allows the customer to access his accounts from a PC that is installed at his office or at his
home - that is desktop banking - for the customer.
Anywhere Banking
With the introduction of ATMs and tele-banking, financial details can be accessed from remote
locations and basic transactions can be effected even outside the bank.
Corporate Banking
At present, by utilising remote banking facility, corporate customers will be able to get the
following services:
(a) Getting their current balance or getting their statement of accounts for any pre-defined
period
(b) Ordering cheque books
(c) Ordering intra-bank and inter-bank fund transfers
(d) Instructing stop payments of cheques
(e) International remittances
(f) Opening letter of credits.
Cheque Truncation
Process of stopping the flow of the physical cheque issued by a drawer to the drawee branch.
The physical instrument will be truncated at some point en-route to the drawee branch and an
electronic image of the cheque would be sent to the drawee branch along with the relevant
information like the MICR fields, date of presentation, presenting banks etc.
Mobile Banking
Undertaking banking transactions using mobile phones by bank customers that involve
credit/debit to their accounts.
Only banks which are licensed and supervised in India and have a physical presence in India will
be permitted to offer mobile banking services.
Only banks who have implemented core banking solutions would be permitted to provide mobile
banking services.
The services shall be restricted only to customers of banks and/or holders of debit/credit cards
issued as per the extant Reserve Bank of India guidelines.
Only Indian Rupee based domestic services shall be provided. Use of mobile banking services
for cross border inward and outward transfers is strictly prohibited.
Unit – 33 : Data Communication Network and EFT Systems
Data communication consists of various data communication components. It has three basic
components.
1. Transmission Devices and Interface Equipment
Modem conversion between the digital and analog forms is carried out by an interface device
called Modem
2. Transmission Medium
Terrestrial Cables
a. Twisted-wire Pair - A twisted pair consists of two insulated copper wires
b. Coaxial Cable - The Coaxial cable consist of an inner copper conductor held in position by
circular spacers.
c. Optical Fibre - Optical fibre has been a technological breakthrough in communications. It
supports data rate of 2 giga bits/sec. Fibre Optics provide high quality transmission of signals at
very high speeds. Not affected by electromagnetic interference. The transfer of data is through
very thin glass or plastic fibres with a beam of light. The light source is the laser beam driven by
a high speed high current driver.
3. Microwave System microwave signals may be passed on to the satellite.
4. Transmission Processors
Message Switcher is used to store and forward data to large number of terminals over a single
communication channel.
Multiplexer send more than one signal simultaneously over a single communication channel.
Front End Processors used to intercept and handle communication activities for the host
computer. A device located at the site of the CPU or the host computer. It relives the computer of
the communication tasks leaving it free for processing application programs.
Modes Of Transmission
Simplex – transmitting data in only one direction (commercial radio)
Half-Duplex – transmission is both directions, but in only one direction at a time. WALKY
TALKY
Full Duplex – Simultaneous two-way transmission. MOBILE
Major Networks
INET
NICNET
INDONET
Emerging Trends in Communication Networks For Banking
RBI’s VSAT Network
Internet – The connection to the host computer of the ISP is established through the interface
protocol software, using following two protocols :
Serial Line Protocol (SLIP)
Point to Point Protocol (PPP)
Automated Clearing Systems
CHIPS - Clearing House Inter-bank Payment System
CHAPS – Clearing House Automated Payment System
CHATS – Clearing House Automated Transfer System.
Two-Level Funds Transfer System
Fed Wire
Bank Wire
Point of Sale Systems
NationalElectronicFundsTransfer (NEFT)System
1. Amount - There is no minimum or maximum amount to be remitted.
2. Batches: The settlement of transactions is in batches.
3. Normally, the beneficiary should get credit within 2 hours from the time of completion of
batch i.e. on B+2 basis on the same day.
4. Processing Charges/Service Charges: Upto Rs 10,000: Maximum Rs 2.5; Upto Rs 1 lac:
Maximum Rs 5; More than 1 lac to Rs 2 lac: Rs 15; More than Rs 2 lac: Max Rs 25. (Service tax
extra). Update yourselves with latest charges.
5. Difference between IFS Code and MICR: Indian Financial System Code (IFSC) is an alpha
numeric code designed to uniquely identify the bank-branches in India. This is 11 digit code with
first 4 characters representing the banks code, the next character reserved as control character
(Presently 0 appears in the fifth position) and remaining 6 characters to identify the branch. The
MICR code has 9 digits to identify the bank-branch. IFSC code is printed on cheques leaves
issued to their customers.
Real-Time Gross Settlement (RTGS) System
PI – Participant Interface.
1. The message is passed on by PI to IFTP (Inter – Bank Fund Transfer Processor) which acts as
a broker.
2. RTGS system is a funds transfer mechanism where transfer of money takes place from one
bank to another on a "real time" and on "gross" basis.
3. This is the fastest possible money transfer system through the banking channel.
4. RTGS helps in preventing Systemic and Settlement Risks.
5. Minimum/maximum amount for RTGS transactions : Minimum amount : Rs 2 lakh; Max : No
limit.
Unit – 34 : Role of Technology Upgradation and its Impact on Banks
Data Warehouse: Data from heterogeneous sources is stored to generate critical information for
decision support systems. The main characteristics of the data stored in a Data Warehouse are:
It is Subject-Oriented
It is integrated, and there are no inconsistencies
The data in a Data Warehouse is non-volatile
It is time variant
Data Warehouse can be established even across multiple computer platforms as long as the
transaction details are made available to the data warehouse in standardized formats.
Data Mining is a technique to reveal the strategic information hidden in Data Warehouse(s). It
helps in exposing the patterns that are critical to business and provide an advantage through
insight and knowledge of:
1. Sound predictions of customer behavior
2. Highly targeted market focus
3. Maximized operational effectiveness
4. Optimal return on Investment.
Establishment of Data Warehouse : Vasudevan Committee
Data Mining techniques can be applied in Predicting future trends based on information
available
Credit Risk Analysis
Analyzing demographic information about customers
Banks can use a corporate website for
a. Dissemination of information
b. Financial Advice
c. To highlight non-banking activities
d. A node for commerce
e. Selling financial products
f. Gateway to the internet
g. Account Services
Unit – 35 : Security Considerations
A typical computerised environment constitutes three independent but separate components
Software, Hardware and Data
The Risks broadly lead to
Incorrect decision-making leading to setback to business
Interruption in activities due to loss of data, hardware, software, Peopleware.
Violation of Privacy
Direct Financial loss due to computer frauds.
The objective of Computer Auditing is:
Assets safeguarding
Preserving data integrity
Achieving system efficiency
Risk prone components in computerised systems
Errors and omissions in data and software
Unauthorised disclosure of confidential information
Computer abuse and mis-utilisation of banks assets
Effective Control Mechanism in computerised environment
Preventive
Detective
Corrective
Scope of System Audit is
Review of operations to establish compliance
Review of the adequacy of procedures and controls
Integrity review focused at fraud detection/prevention of IT system
Audit Trail is a chronological record of all events occurring in a system.
Legal Framework for Electronic Transactions
Consequent upon the recognition given to the electronic records, electronic documents and
electronic signatures, incidental amendments have also been made in the following acts:
The Indian Penal Code, 1860
The Indian Evidence Act, 1872
The Bankers’ Books Evidence Act, 1891
The Reserve Bank Of India Act 1934
JAIIB - Principles & Practices of Banking-Module-D -
Support Services-Marketing of Banking Services/Products
Unit 36 : Marketing – An Introduction
Marketing Management
Marketing (management) is the process of planning and executing the conception, pricing,
promotion and distribution of goods, service, and ideas to create exchanges with target groups
that satisfy customer and organizational objectives.
Functions of Marketing Management
Analysis
Planning
Implementation
Control
Characteristics of Services
1. Intangibility
2. Inseparability
3. Heterogeneity
4. Perishability
Physical Goods Services
1. Tangible Intangible
2. Homogeneous Heterogeneous
3. Production and Distribution are separated from consumption
Production, Distribution and Consumption are simultaneous process
4. A thing, an activity or process
5. Core value produced in factory Core value produced in buyer-seller interactions
6. Customers do not participate Customers participate in the production
7. Can be kept in stock cannot be kept in stock
8. Transfer of ownership No Transfer of Ownership
Unit 37 : Social Media Marketing
Social Media Marketing is a term used to describe marketing techniques that are focused on
social media sites such as Twitter, FaceBook and Youtube etc,. It is actually using social media
as a communications tool that makes the companies accessible to those interested in their product
and make them visible to those who have no knowledge of their products.
Scope in Social Media Marketing
Social Media Marketing has a huge scope in India. As rightly pointed out by earlier user,
Facebook has more than 20 million Indians. Most of the youth-focused brands already have an
active social media presence. But the trend might not have caught the brands targeting other age
segments.
We are seeing in explosion in internet penetration in India which in turn will propel growth in
social media. We are seeing lots and lots of brands, both big and small, getting onto social
media. If employed properly, it can even help start-ups rise to prominence.
Some of the popular Social Marketing Networks
1. Twitter. Perhaps the simplest of all social media platforms, Twitter also just happens to be one
of the most fun and interesting. Messages are limited to 140 characters or less, but that’s more
than enough to post a link, share an image, or even trade thoughts with your favorite celebrity or
influencer. Twitter’s interface is easy to learn and use, and setting up a new profile only takes
minutes.
2. Facebook. Considered to be synonymous with “social media” by some, Facebook is the one
site where you’re likely to find friends, colleagues, and relatives all floating around. Although
Facebook is mainly centered around sharing photos, links, and quick thoughts of a personal
nature, individuals can also show their support to brands or organizations by becoming fans.
3. LinkedIn. One of the only mainstream social media sites that’s actually geared towards
business, LinkedIn is to cyberspace what networking groups once were to local business
communities. It’s great for meeting customers, getting in touch with vendors, recruiting new
employees, and keeping up with the latest in business or industry news. If it matters to your
company or career, you can probably do it on LinkedIn.
4. Xing. Another professional networking and recruitment site, Xing has the global presence and
focus that LinkedIn lacks. Although it can be mistaken for a job search portal, the site actually
has a number of features and communities that make it easy to develop relationships with
suppliers, colleagues and even thought leaders within industry.
5. Google+. Social media’s big up-and-comer has really arrived over the past few years. By
combining the best of Facebook and Twitter into one site – and backing it by the power of the
world’s largest search engine, Google has given users a social site that has a little something for
everyone. You can add new content, highlight topics with hashtags, and even separate contacts
into circles. And, a G+ profile only takes a few minutes to get set up.
6. Pinterest. Serving as a giant virtual idea and inspiration board, Pinterest has made a huge
impact on social media in the last few years. Especially popular with women and the do-ityourself
crowd, it lets you share pictures, creative thoughts, or (especially) before-and-after
pictures of projects that others can pin, save, or duplicate.
7. YouTube. As a video sharing service, YouTube has become so popular that its catalog of
billions and billions of videos has become known as “the world’s second-largest search engine”
in some circles. The site has everything from first-person product reviews to promotional clips
and “how-two” instruction on virtually any topic or discipline. Users have the ability to share,
rate, and comment on what they see.
8. Instagram. If you’re looking for a quick, convenient connection between the camera feature on
your smart phone and all your social profiles, then Instagram is the answer. Not only will allow
you to share via Twitter, Facebook, and the Instagram website, you can choose from a variety of
photo filters and invite friends to comment on your photos or ideas.
Banks in India and Social Media Marketing
Indian Banking Industry has shown a tremendous growth on Social Media platforms like
Facebook, Twitter, YouTube etc. The Banking sector in India has proven that its not just about
opening saving bank accounts, credit cards, investments, wealth management, mutual funds,
insurance and so on. With the increasing growth in Social Media in India, banks have understood
that likes, tweets, shares do matter to engage with the young generation.
With a more globalized approach and increasing competition, banks have increased their
marketing budgets and Social Media is one of the major portion of it. There are banks that we
have seen, using social platforms as another customer care, using them to showcase their thought
leadership, using them to launch new products, endorsing celebrities and many more.
Social media is being used by businesses to discuss products and services. Consumers like to use
services which not only tell them about themselves but also listen to them. A few private banks
like ICICI and HDFC have begin to understand this shift and have started to be engaging rather
than selling but majority of the banks in India still have a long way to go.
Unit 38 : Consumer Behaviour and Product
A Product is anything that can be offered to a market for attention, acquisition, use, or
consumption that might satisfy a want or need.
Product Personality
The Core
The Associated Features
The Brand Name and Logo
The Package and Label
Product Levels
Product Categories
Product Item, Product Line and Product Mix
The Banking Product
Product Planning
The process of product planning consists of determining the strategies in respect of various
elements:
Product Line
Product Mix
Branding
Packaging and New Product Development
Product Life Cycle
Introduction
Growth
Maturity
Decline
New Product Development
The Process of product Development comprises five main stages:
Idea Screening
Concept Testing
Product Development
Test Marketing
Commercial Launch
Diversification
Diversification refers to entering attractive opportunities which are outside the existing
businesses of the firm. Three types of diversification
Concentric Diversification
Horizontal Diversification
Conglomerate Diversification
Other Aspects of Product Development
Branding
Line Extension
Brand Extension
Multibrands
New Brands
Packaging
1. Primary Package
2. Secondary Package
3. Shipping Package
Unit 39 : Pricing
Cost Based Pricing
Value Based Pricing
Competition Based Pricing
Group Pricing
1. Mark up Pricing
2. Absorption Cost Pricing
3. Target-return Pricing
4. Marginal Cost Pricing
5. Perceived value pricing
6. Value Pricing
7. Going – Rate Pricing
8. Auction- Type Pricing
English Auctions
Dutch Auctions
Sealed – bid Auctions
Pricing Strategies
1. Geographical Pricing: different locations, different prices, cost of transportation included.
2. Price Discounts and Allowance : Cash Discount, Quantity Discount, Functional Discount,
Seasonal Discount
3. Psychological Pricing: To many consumers think that higher priced product to be of better
quality. By setting the price in particular range sellers can create an impression about the product
belongs to the particular class
4. Promotional Pricing :
5. Discriminatory Pricing: when different prices are changed to different buyers.
6. Product-Mix Pricing :
7. Market-skimming Pricing: Product is initially priced higher, and over a period of time it is
reduced to attract more buyers, with a view to ‘skimming’ the revenues layer to layer from the
market.
8. Market-penetration Pricing: Setting the price low initially in order to penetrate the market
quickly and deeply attracting a large market share.
Unit 40 : Distribution
Functions of Distribution Channel
Market Information
Promotion
Contact
Matching
Negotiation
Product Information
Physical Distribution
Financing
Risk Taking
Channel Types
Following factors influenced producers to select the channels for distribution.
Product Characteristics
Market Characteristics
Customer Characteristics
Company Resources
Competition
Product Lines
Unit 41 : Channel Management
Channels for Banking Services
The following factors affects the channel decision
Intangibility
Inseparability
Variability
Perishability
Client Relationship
Channels
1. Branches are the primary distribution outlets for banking services. These are fixed in location
and customer is required to visit the branches.
2. Other Channels
Tele-banking and Call Centres
ATMS
Personal Computer
Plastic Cards
Virtual Branches
3. Intermediaries in Banking Services
Direct Sales Agents
Automobile Dealers
Merchant Establishments
Unit 42 : Promotion
Role of Promotion in Marketing
Promotion is the exercise of communicating the properties of different elements of marketing
mix to the customers with the motto of influencing them. This involves the following aims:
a) Persuasion
b) Inform
c) Reminding
d) Reinforcing
Promotion Mix
The promotion mix comprises the following tools:
Advertising
Sales Promotion
Public Relations
Personal Selling
Direct Marketing
Promotion-mix Strategies
There are two basic promotion-mix strategies
Push Strategy – promotion efforts are directed at the channel members to induce them to
purchase the products and sell them to the final customer.
Pull Strategy - promotion efforts are directed to the final consumer to induce them to buy the
product
Factors influencing the Promotion Mix
Three major factors affecting the choice of promotion mix are
Type of Product / Market
Buyers’ Readiness Stage
Product Life Cycle Stage
Unit 43 : Role of Direct Selling Agent/Direct Marketing Agent in a Bank
Roles and Responsibilities of Direct Selling Agent/Representative
In The primary responsibility of the Banking Direct Selling Agent/Representative is branch
management and in-branch services, teller and platform services, financial product sales,
customer services, and management of lending risk to retail customer base. He builds a client
base for banking direct sales through prospecting, networking, and referrals.
A typical job description for the Banking Direct Selling Agent Representative role may include:
1. Develops new business prospects in specific geographic areas through cold calls.
2. Interacts with existing customers to increase sales of the bank's products and services.
3. Requires a high school diploma or equivalent and 2-4 years of experience in the field or in a
related area.
4. Familiar with standard concepts, practices, and procedures within a particular field.
IBA Model Code of Conduct for Direct Selling Agents
1. Tele-calling a Prospect (a prospective customer)
A prospect is to be contacted for sourcing a bank product or bank related product only under the
following circumstances:
a. When prospect has expressed a desire to acquire a product through the bank's internet site/call
centre/Branch or through the Relationship Manager at the bank or has been referred to by
another prospect/customer or is an existing customer of the bank who has given consent for
accepting calls on other products of the bank.
b. When the prospect's name/telephone no/ address is available & has been taken from one of the
lists/directories/databases approved by the DSA Manager/Team leader, after taking his/ her
consent.
The TME should not call a person whose name/number is flagged in any "do not disturb" list
made available to him/her.
2. When you may contact a prospect on telephone
Telephonic contact must normally be limited between 0930 Hrs and 1900 Hrs. However, it may
be ensured that a prospect is contacted only when the call is not expected to inconvenience
him/her.
Calls earlier or later than the prescribed time period may be placed only under the following
conditions:
When the prospect has expressly authorized TME/BDE to do so either in writing or orally
3. Can the prospect's interest be discussed with anybody else?
DSA should respect a prospect's privacy. The prospect's interest may normally be discussed only
with the prospect and any other individual/family member such as prospect's
accountant/secretary /spouse, authorized by the prospect.
4. Leaving messages and contacting persons other than the prospect.
Calls must first be placed to the prospect. In the event the prospect is not available, a message
may be left for him/her. The aim of the message should be to get the prospect to return the call or
to check for a convenient time to call again. Ordinarily, such messages may be restricted to:
Please leave a message that ______________ (Name of officer) representing Axis Bank called
and requested to call back at __________ (phone number)".
As a general rule, the message must indicate:
That the purpose of the call is regarding selling or distributing a bank product of Axis Bank
5. No misleading statements/misrepresentations permitted
TME/BDE should not -
• Mislead the prospect on any service / product offered;
• Mislead the prospect about their business or organization's name, or falsely represent
themselves.
• Make any false / unauthorised commitment on behalf of Axis Bank for any facility/service.
6. Telemarketing Etiquettes
PRE CALL
No calls prior to 0930 Hrs or post 1900 Hrs unless specifically requested.
- No serial dialing
- No calling on lists unless list is cleared by team leader
DURING CALL
- Identify yourself, your company and your principal
- Request permission to proceed
- If denied permission, apologize and politely disconnect.
- State reason for your call
- Always offer to call back on landline, if call is made to a cell number
- Never interrupt or argue
- To the extent possible, talk in the language which is most comfortable to the prospect
- Keep the conversation limited to business matters
- Check for understanding of "Most Important Terms and Conditions" by the customer if he
plans to buy the product
- Reconfirm next call or next visit details
- Provide your telephone no, your supervisor's name or your bank officer contact details if asked
for by the customer.
- Thank the customer for his/her time
POST CALL
- Customers who have expressed their lack of interest for the offering should not be called for the
next 3 months with the same offer
- Provide feedback to the bank on customers who have expressed their desire to be flagged "Do
Not Disturb"
- Never call or entertain calls from customers regarding products already sold. Advise them to
contact the Customer Service Staff of the bank.
7. Gifts or bribes
TME/BDE's must not accept gifts from prospects or bribes of any kind. Any TME/BDE offered
a bribe or payment of any kind by a customer must report the offer to his/her management.
8. Precautions to be taken on visits/contacts
BDE should :
• Respect personal space - maintain adequate distance from the prospect.
• Not enter the prospect's residence/office against his/her wishes;
• Not visit in large numbers - i.e. not more than one BDE and one supervisor, if required.
• Respect the prospect's privacy.
• If the prospect is not present and only family members/office persons are present at the time of
the visit, he/she should end the visit with a request for the prospect to call back.
• Provide his/her telephone number, supervisor's name or the concerned bank officer's contact
details, if asked for by the customer.
• Limit discussions with the prospect to the business - Maintain a professional distance.
9. Other important aspects - Appearance & Dress Code
BDE's must be appropriately dressed -
For men this means
- Well ironed trousers;
- Well ironed shirt, shirt sleeves preferably buttoned down.
For women this means
- Well ironed formal attire (Saree, Suit etc.);
- Well groomed appearance.
Jeans and/or T Shirt, open sandals are not considered appropriate.
10. Handling of letters & other communication
Any communication sent to the prospect should be only in the mode and format approved by the
Bank.
Unit 44 : Marketing Information System
Need of MIS
a) Complex marketing activity
b) Knowledge / information explosion
c) Communication Gap
d) Prompt Decisions
e) Non-Price Competition
Kind of Information needed
Information about market forces
Information about the bank’s market behaviour
Internal Information
Components of MIS
MIS consists of four subsystems, which facilities the entire MIS system.
a) Internal Record System
b) Market Intelligence System
c) Marketing Research System
d) Marketing Management and Science System
No comments:
Post a Comment